718655
41
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
37
Problem Possible Cause Solution
Poor Print Quality.
The ribbon/media is loaded
incorrectly.
Dust or adhesive has
accumulated on the Print
Head.
The print density is set
incorrectly.
The Print Head mechanism
is damaged.
The ribbon/media are
incompatible.
Reload the media/ribbon.
Clean the Print Head.
Clean the Platen Roller.
Adjust the print density and print speed.
Run the printer self-test and check the
Print Head test pattern for missing dots.
Install the correct ribbon/media.
Labels are skipped when
printing.
The label size is not
specified correctly.
The sensor sensitivity is not
set correctly.
The media sensor is dirty.
Check if the label size is set up correctly.
Calibrate the sensor using the Auto Gap
or Manual Gap options.
Clean the Gap/Black Mark Sensor using
a blower brush.
The printing position of small
labels is incorrect.
The media sensor sensitivity
is not set correctly.
The label size is incorrect.
The vertical offset setting in
the driver is incorrect.
Calibrate the sensor sensitivity again.
Set the correct label size and gap size.
If using the BarTender software, set the
Vertical Offset in the driver.
Incomplete printing on the left
or right side of label.
The label size is set up
incorrectly.
Set the correct label size.
Warped labels.
The ribbon is installed
incorrectly.
The media is installed
incorrectly.
The print density setting is
incorrect.
The media is not fed
correctly.
Adjust the print density to improve the
print quality.
Make sure the label guide touches the
edge of the Media Guide Tips.
Blank labels with gray lines.
The Print Head is dirty.
The Platen Roller is dirty.
Clean the Print Head.
Clean the Platen Roller.
Irregular printing.
The printer is in Hex Dump
mode.
Turn the printer on and off to skip the dump
mode. (See section 4.3.2)
For more information about cleaning the printer, see section 7.
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother TD-4420TN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother TD-4420TN in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Brother TD-4420TN

Brother TD-4420TN Gebruiksaanwijzing - Nederlands - 44 pagina's

Brother TD-4420TN Gebruiksaanwijzing - Deutsch - 45 pagina's

Brother TD-4420TN Gebruiksaanwijzing - Français - 45 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info