579450
4
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
For Windows
®
7
1. Turn off the P-touch labeler.
2. From the Start menu, click [Devices and Printers].
3. Select [Brother PT-P700] and click [Remove device], or right-click the icon and click
[Remove device].
If a User Account Control message appears, type in the password, and then click [Yes].
4. Select [Fax] or [Microsoft XPS Document Writer] in the [Devices and Printers] window,
and then click [Print server properties], which appeared on the menu bar.
5. Click the [Drivers] tab, and then click [Change Driver Settings]. If a User Account Control
message appears, type in the password, and then click [Yes]. Select [Brother PT-P700],
and then click [Remove...].
6. Select [Remove driver and driver package], and then click [OK]. Follow the on-screen
instructions.
7. Close the [Print Server Properties] window. The printer driver has been uninstalled.
For Windows
®
8
1. Turn off the P-touch labeler.
2. Click [Control Panel] on the [Apps] screen - [Hardware and Sound] - [Devices and
Printers].
3. Select [Brother PT-P700] and click [Remove device], or right-click the icon and click
[Remove device].
If a User Account Control message appears, type in the password, and then click [Yes].
4. Select [Fax] or [Microsoft XPS Document Writer] in the [Devices and Printers] window,
and then click [Print server properties], which appeared in the menu bar.
5. Click the [Drivers] tab, and then click [Change Driver Settings]. If a User Account Control
message appears, type in the password, and then click [Yes]. Select [Brother PT-P700],
and then click [Remove...].
6. Select [Remove driver and driver package], and then click [OK]. Follow the on-screen
instructions.
7. Close the [Print Server Properties] window. The printer driver has been uninstalled.
For Mac OS X v10.6.8 - v10.8.x
1. Turn off the P-touch labeler.
2. Click [Apple menu] - [System Preferences], and click [Print & Fax] (OS X v10.6.8) /
[Print & Scan] (OS X v10.7.x/v10.8.x).
3. Choose [Brother PT-P700], and click [-].
4. Close the [Print & Fax] (OS X v10.6.8) / [Print & Scan] (OS X v10.7.x/v10.8.x) window.
The printer driver has been uninstalled.
Uninstalling the software
Perform this procedure only if the software is no longer necessary or when re-installing the
software.
To uninstall the software, follow the usual steps for your operating system.
10
Definition of the Status Lamp
The Status lamp on the P-touch labeler indicates the current operating condition.
11
Troubleshooting
12
Specifications
*1
Not included.
*2
Visit us at http://solutions.brother.com/ for the latest information about the recommended
batteries.
Please see the Brother Solutions Center (http://solutions.brother.com/
) for the latest compatible
OS.
Lamp Condition
Not lit
Power is OFF.
Green lamp is lit
Power is ON.
Green lamp is flashing
Receiving data from the computer.
Transferring data.
Orange lamp is lit
The cassette cover is open. Close the cassette cover correctly.
Starting the reset procedure, or the Feed & Cut button was
pressed during the reset procedure.
For details on resetting the P-touch labeler, see
Troubleshooting.
Orange lamp is flashing
Cooling (Wait for the temperature to cool down)
Reset in progress. For details on resetting the P-touch labeler,
see Troubleshooting.
Red lamp is lit
The P-touch labeler is booting.
Red lamp is flashing
Indicates one of the following errors.
Red lamp flashes in 0.9 second intervals:
No tape cassette
Incorrect tape cassette installed
Incompatible tape cassette installed
The cassette cover was opened during printing
Transmission error
Overheating error
Cutter error
Red lamp flashes in 0.3 second intervals:
•System error
Problem Solution
After exiting P-touch Editor
Lite, how do I restart the
program while the P-touch
labeler is still on?
There are three ways to restart. Perform any of the following.
Turn off the P-touch labeler and then turn it back on.
Disconnect and then reconnect the USB cable while the
P-touch labeler is on.
(For Windows
®
)
Launch P-touch Editor Lite from [My Computer].
I cannot turn the P-touch
labeler on.
Check to see that the batteries are installed correctly, or that
the included power adapter is securely connected.
I cannot exit P-touch Editor
Lite.
Check to see if an error message is displayed, and try to
resolve it. Please note that the software cannot be exited while
labels are being printed.
A blank horizontal line
appears through the printed
label.
Streaks or poor quality characters on printed labels generally
indicate that the print head is dirty. Clean the print head using
a cotton swab or optional print head cleaning cassette (TZe-
CL4).
* Do not touch the print head directly with your bare hands.
The label is difficult to cut. Clean the cutter blade using a cotton swab moistened with
alcohol.
* Do not touch the cutter blade directly with your bare hands.
When the label is printed out,
there is too much margin
(space) on both sides of the
text.
When margins are set to [Large], labels print with approx. 1"
(25 mm) margins on each side of the printed text. Reduce this
margin by changing the setting to [Small].
On P-touch Editor Lite, right-click the mouse and select
[Margins] from the displayed menu. Change the setting to
[Small].
The P-touch labeler does not
print, or the printed
characters are not formed
properly.
Check that the tape cassette has been inserted correctly.
If the tape cassette is empty, replace it.
Check the cassette cover is properly closed.
The power turns off when you
try to print.
The batteries may be weak. Replace them.
Check that the batteries are correctly inserted.
An incorrect adaptor is being used; the recommended
adapter is the AD-E001.
The tape does not feed
properly, or the tape gets
stuck inside the P-touch
labeler.
Check that the end of the tape feeds under the tape guides.
The Feed & Cut button was used while printing. Do not touch
the Feed & Cut button during printing.
I want to reset the P-touch
labeler.
With the P-touch labeler off, press and hold the Feed & Cut
button while holding down the Power button. When the Editor
Lite lamp starts flashing and the Status lamp lights orange,
press the Feed & Cut button six times while continuing to hold
down the Power button. The P-touch labeler will be reset to the
factory settings.
Product Specifications
Dimensions (W × D × H) Approximately 3.1" (W) × 6.0" (D) × 5.6" (H)
(78 mm (W) × 152 mm (D) × 143 mm (H))
Weight Approximately 1.6 lb (710 g) (without batteries and tape
cassette)
Power supply AC adapter (AD-E001)
Six "AA" alkaline batteries (LR6)
*1
Six "AA" Ni-MH rechargeable batteries (HR6)
*1
*2
Accessories
Tape cassette Brother TZe tape (width)
0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm),
0.70" (18 mm), 0.94" (24 mm)
AC Adapter AD-E001
System Requirements
Windows
®
Macintosh
Operating System
Windows Vista
®
/
Windows
®
7/Windows
®
8
Mac OS X
v10.6.8/v10.7.x/v10.8.x
Hard-Disk Free Space 70 MB or more 500 MB or more
Memory
Windows Vista
®
: 512 MB or
more
Windows
®
7/Windows
®
8:
1 GB (32-bit) or 2 GB (64-bit)
or more
2 GB or more
Display SVGA/High Color or more More than 256 colors
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother P-Touch P700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother P-Touch P700 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Brother P-Touch P700

Brother P-Touch P700 Gebruiksaanwijzing - Nederlands - 4 pagina's

Brother P-Touch P700 Gebruiksaanwijzing - Deutsch - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info