681578
25
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
Error Message Action
Out of Fax Memory Print the faxes stored in the memory. For more detailed information,
see the Online User's Guide: Print a Fax Stored in the Machine's
Memory.
Out of Memory If a fax-sending or copy operation is in progress:
Press Stop/Exit and wait until the other operations that are in
progress finish, and then try again.
Press c to select Partial Print to copy the pages scanned so
far.
Print the faxes stored in the memory.
For more detailed information, see the Online User's Guide: Print a
Fax Stored in the Machine's Memory.
Paper Size
Mismatch
1. Check that the paper size you selected on the machine's display
matches the size of the paper in the tray.
For more detailed information, see the Online User's Guide:
Change the Paper Size and Paper Type.
2. Make sure you loaded the paper in a Portrait position, by setting
the paper guides at the indicators for your paper size.
For more detailed information, see the Online User's Guide: Load
Paper.
3. After you have checked the paper size and the paper position,
follow the LCD instructions.
If printing from your computer, make sure the paper size you selected
in the printer driver matches the size of paper in the tray.
For more detailed information, see the Online User's Guide: Print
Settings (Windows®) or Print Options (Mac).
Replace Ink One or more of the ink cartridges have reached the end of their lives.
Replace the ink cartridges.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
You can still scan even if the ink is low or needs to be replaced.
Tray not detected Slowly push the paper tray completely into the machine.
Paper or a foreign object has prevented the paper tray from being
inserted correctly.
Pull the paper tray out of the machine, and remove the jammed paper
or foreign object. If you cannot find or remove the jammed paper, see
the Online User's Guide: Printer Jam or Paper Jam.
Tray Settings This message is displayed when the setting to confirm the paper type
and size is enabled.
To not display this confirmation message, change the setting to Off.
For more detailed information, see the Online User's Guide: Change
the Check Paper Size Setting.
24
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Brother-MFC-J497DW

Zoeken resetten

  • Bij het afdrukken van foto's (15X10) krijg ik steeds een verticale witte baan (ca 4 á 5 cm) over de verder heldere afbeelding. Ook als ik a4-papier gebruik is dat het geval. Ik heb met het afdrukken geen enkel probleem. Ik heb dit probleem voordien nooit gehad. Ik heb ook niet (bewust) de instellingen veranderd. Wat moet ik doen om dit probleem op te lossen? Gesteld op 29-3-2021 om 11:02

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother MFC-J497DW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother MFC-J497DW in de taal/talen: Engels als bijlage per email.

De handleiding is 2,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Brother MFC-J497DW

Brother MFC-J497DW Installatiehandleiding - Nederlands - 2 pagina's

Brother MFC-J497DW Snelstart handleiding - Nederlands - 36 pagina's

Brother MFC-J497DW Gebruiksaanwijzing - Nederlands - 640 pagina's

Brother MFC-J497DW Installatiehandleiding - Deutsch - 2 pagina's

Brother MFC-J497DW Gebruiksaanwijzing - Deutsch - 644 pagina's

Brother MFC-J497DW Snelstart handleiding - Deutsch - 38 pagina's

Brother MFC-J497DW Installatiehandleiding - English - 2 pagina's

Brother MFC-J497DW Gebruiksaanwijzing - English - 627 pagina's

Brother MFC-J497DW Installatiehandleiding - Français - 2 pagina's

Brother MFC-J497DW Gebruiksaanwijzing - Français - 652 pagina's

Brother MFC-J497DW Snelstart handleiding - Français - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info