657412
103
Verklein
Vergroot
Pagina terug
1/106
Pagina verder
HE-800B
11. TROUBLESHOOTING
94
11-24. Work clamp is not raised (2)
…… Pulse motor stepping sound can be heard
Items with a “*” in the “Page” column should only be handled by a qualified technician.
Cause Check Remedy Page
Interference between
upper thread trimmer and
work clamp
Adjust the installation height of the upper thread
trimmer (remove the upper thread trimmer and check).
* Be particularly careful when sewing joints.
68*
Upper thread trimmer
Upper thread trimmer
operation
Apply grease to the inclined face of the opening cam.
69*
Interference between fixed
knife set, lower thread
clamp, lower thread
presser and lower thread
retainer.
Repair or replace the parts.
*
Lower thread trimmer
Rubbish, dust or thread
scraps present
Remove all rubbish, dust and thread scraps from the
lower thread trimmer.
*
Loose screws
Check for loose screws in
the upper thread trimmer,
lower thread trimmer and
work clamp lifter
mechanisms.
Securely tighten all screws.
*
Work clamp lifting
height setting
Check the work clamp
lifting height setting.
Change the settings of memory switch Nos. 001, 002,
003, 004.
* If the work clamp lifting height is too high, the lower
thread trimming operation and the work clamp lifting
will become stiff, and the work clamp motor may go
out of step.
56
Lower thread threading
Insert the bobbin correctly and pass the lower thread
through the bobbin case correctly.
* If the bobbin is inserted back-to-front, it will spin
loosely and the work clamp motor may go out of
step.
25
Threading
Lower thread tension
Reduce the lower thread tension.
* If the lower thread tension is much too strong, the
work clamp motor may go out of step.
Use memory switch No. 060 to reduce the work
clamp lifting speed setting to make the lifting speed
slower.
Buff this section A to reduce the
thread retaining resistance.
26
*
*
Upper thread trimmer
Upper thread trimmer
operation
Carry out opening timing adjustment for the upper
thread trimmer.
69
Work clamp home
position sensor
Work clamp home position
sensor position
Adjust the work clamp home position sensor position.
*
4022Q
Remove the shoulder
screw to check.
Lower thread
trimmer link A assembly
Lower thread
trimmer
connecting rod
4023Q
A
103

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother HE-800B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother HE-800B in de taal/talen: Engels als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info