631141
47
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
45
6
5
Using a coin, remove the two screws.
Lift up the needle plate as shown in the
illustration, and then slide the needle plate to
the left to remove it.
1 Use a coin or screwdriver
6
Grasp the bobbin case, and then lift it out to
the left.
7
Use the cleaning brush or a vacuum cleaner to
remove any dust from the race and its
surrounding area.
1 Cleaning brush
2 Race
Do not apply oil to the bobbin case.
8
Insert the bobbin case so that the projection
on the bobbin case aligns with the spring.
1 Projection
2 Spring
9
Install the needle plate, sliding it to the right
to secure it, and then tighten the screws.
Make sure that the tab on the left side of the
needle plate is aligned with the notch in the
bobbin case.
1 Tab
2 Notch
3 Screws
0
Install the needle plate cover.
Insert the tabs on the needle plate cover into
the notches in the needle plate, and then slide
the cover back into position.
Never use a bobbin case that is
scratched; otherwise the upper thread
may become tangled, the needle may
break, or sewing performance may
suffer. For a new bobbin case (part code:
XC8993-021), contact your nearest
authorized service center.
Make sure that you fit the bobbin case
properly, otherwise the needle may
break.
3
CAUTION
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother BM-2700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother BM-2700 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Brother BM-2700

Brother BM-2700 Gebruiksaanwijzing - Nederlands - 51 pagina's

Brother BM-2700 Gebruiksaanwijzing - Deutsch - 51 pagina's

Brother BM-2700 Gebruiksaanwijzing - Français - 51 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info