729922
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
ALARM TIME SETTING AND DISPLAY
1. In normal time mode, press [ TIME ] key to select the alarm 1 or alarm 2.
2. In alarm1/alarm2 mode, press and hold [ ALARM ] key for 2 seconds until alarm hour
digit ashes.
3. Press [ CH /
] or [ 12/24 / ] key to change the value
4. Repeat the above operations to set the alarm time in this order: Hour
Minute
Ice pre-alarm on/o.
5. Press [ ALARM ] key or leave the unit for 30 seconds to return to normal mode.
Time of alarm 2
Ice alert icon
USING ALARM AND SNOOZE FUNCTION
1. Set the desired alarm time as described in the previous section.
2. Or press [ ALARM ] key to turn on alarm 1, press it again to turn on alarm 2, press
it thrice to turn on both alarm 1 and alarm 2, with the alarm icons “
” and / or “
” displays on the LCD. Press it again to turn o both alarm 1 and alarm 2, with the
icons disappear.
3. When clock reach the alarm time, alarm sound will start.
Where it can be stopped by following operation:
a) Auto-stop after 2 minutes alarming if without any operation and the alarm will activate
again in the next day.
b) By pressing [ SNOOZE / LIGHT ] key to enter snooze that the alarm will sound again
after 5 minutes.
c) By pressing and hold [ SNOOZE / LIGHT ] key for 2 seconds to stop the alarm and
will activate again in the next day
d) By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the
next day.
NOTE:
- The alarm function will turn on automatically once you set the alarm time.
- The snooze could be used continuously in 24 hours.
- During the snooze, the alarm icons “
” and / or “ ” will keep ashing.
- The ice pre-alarm will be activated when the alarm 1 and / or 2 is on.
- Once the ice pre-alarm activates, the preset alarm will sound 30 minutes earlier if the
outdoor temperature is below -3°C.
- To activate the ice pre-alarm function, pls ensure:
a. Turn on the ice pre-alarm function in the alarm setting mode.
b. Turn on the corresponding alarm.
READING INDOOR/OUTDOOR TEMPERATURE & HUMIDITY FUNCTION
In normal mode, press [ °C / °F ] key to switch between °C /°F temperature unit. The
temperature and humidity will display “Hi / Lo / --” on the conditions in the following chart:
Area Condition Display
Temperature
Temperature < -40°C LO
Temperature > 70°C HI
Humidity
Humidity < 20% LO
Humidity > 90% HI
Temperature < -40°C or > 70°C --
NOTE:
- If no signals are received or the transmission is interfered, “- -” will appear on the LCD.
- Relocate the main unit or the transmitter in other positions and make sure the
transmission is within the eective range of 30m approx.
BARO, TEMPERATURE AND HUMIDITY TREND
The Barometric pressure, temperature and humidity trend indicator shows the trends of
changes in the forthcoming few minutes. Arrows indicate a rising, steady or falling trend.
Arrow indicator
Trend Rising Steady Falling
BAROMETRIC/ATMOSPHERIC PRESSURE
TO SELECT THE PRESSURE DISPLAY MODE
Press and hold the [ BARO ] key for 2 seconds to enter select model that allow you
select between:
abs --- the absolute atmospheric pressure of your location.
rel --- the relative atmospheric pressure based on the sea.
TO SET RELATIVE ATMOSPHERIC PRESSURE VALUE
1. Get the atmosphere pressure data of the sea level (it is also the relative atmosphere
pressure data of your home area) through the local weather service, internet and
other weather channels.
2. Press and hold [ BARO ] key for 2 seconds until “abs” or “rel” icon ashes.
3. Press [ CH /
] or [ 12/24 / ] key to switch to “rel” mode.
4. Press [ BARO ] key once again until the “rel” atmosphere pressure digit ashes.
5. Press [ CH /
] or [ 12/24 / ] key to change its value.
6. Press [ BARO ] key to save and exit the setting mode, or let it exit automatically 30
seconds later without pressing any key.
TO SELECT THE MEASUREMENT UNIT FOR THE BAROMETER
Use the [ BARO ] key to change the unit between hPa (mb) / inHg.
NOTE:
- When power up the main unit, it will display the relative pressure reading and default
value is 1013 mb/hPa (29.91 inHg), which refers to the average atmosphere pressure.
- When you change the relative atmosphere pressure value, the weather indicators will
change along with it.
- The relative atmosphere pressure is based on the sea level, but it will change with the
absolute atmosphere pressure changes after operating the clock for 1 hour.
WEATHER FORECAST
The built-in barometer can notice atmosphere pressure changes. Based on the data
collected, it can predict the weather conditions in the forthcoming 24 hours.
Sunny Partly Cloudy Cloudy Rainy Stormy Snowy
NOTE:
1. The accuracy of a general pressure-based weather forecast is about 70% to 75%.
2. The weather forecast is meant for the next 24 hours, it may not necessarily reect the
current situation.
3. The Snowy weather forecast is not based on the atmospheric pressure, but based
on the temperature of current channel. When the outdoor temperature is below -3°C,
the Snowy weather indicator will be displayed on the 24 HOUR FORECAST display
section.
PAST 24 HOURS HISTORY PRESSURE RECORD
The current and historical atmosphere is shown near the
24 HOUR FORECAST section.
To check the pressure history in a particular hour during the
past 24 hours, press the [ HISTORY ] key. Each press on
the key will go back by an hour.
Under the pressure history mode, press any key (except
[HISTORY ] key) to go back the normal mode, or let it exit
automatically 30 seconds later without pressing any key.
HISTORY GRAPH
The history graph is under the time section of the LCD
displays that can show the Baro histories in bar chart
format.
MAX / MIN RECORD
The main unit preserves the MAX / MIN weather data records since the last manual
reset.
1. In normal mode, press [ MEM ] key once to show the indoor & current outdoor
channel maximum temperature and humidity records.
2. Press [ MEM ] key repeatedly to show the minimum records.
3. Press [ MEM ] key again to exit.
4. To erase all the MAX / MIN records, press and hold [ MEM ] key for 3 seconds.
MOON PHASE
The main unit can show the northern hemisphere moon phase status, below is the table
which illustrate how the moon will appear on the main unit.
Moon Phase Icon
Description
Moon Phase Icon
Description
New Moon Full Moon
Waxing Crescent Waning Gibbous
First quarter Third quarter
Waxing Gibbous Waning Crescent
LOW BATTERY ICON
When the battery indicator “
” appear on the clock section or the LCD becomes
dim, replace with 2 new AA size batteries at once; while If the low battery indicator “
appear in the outdoor section, it indicates that the battery power of the transmitter is not
enough, and you should replace with 2 x AA size batteries at once.
IMPORTANT NOTE
- This main unit is intended to be used only indoors.
- Do not subject the unit to excessive force, shock, dust, temperature or humidity.
- Do not cover the ventilation holes with any items such as newspapers, curtains etc.
- Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a
soft, lint-free cloth.
- Do not clean the unit with abrasive or corrosive materials.
- Do not tamper with the unit’s internal components. This invalidates the warranty.
- Only use fresh batteries. Do not mix new and old batteries.
- Do not dispose old batteries as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
- Attention! Please dispose of used unit or batteries in an ecologically safe
manner.
- Technical specications and user manual contents for this product are
subject to change without notice.
SPECIFICATIONS
MAIN UNIT
Dimensions (W x H x D) 140 x 103.5 x 51mm
Main power 2 x AA size 1.5V batteries
Barometer display range 540 to 1100hPa, 15.95 to 32.49inHg
Operating temperature range -5°C to 50°C ( 23°F to 122°F )
Display temperature range (In / Outdoor) -40°C to 70°C (-40°F to 158°F)
Display humidity range (In / Outdoor) RH 20% to 90 %
Resolution of temperature
1 decimal place of °C/°F (above -10°C / °F)
Integer of °C/°F (below -10°C / °F or above
100 °F)
Resolution of humidity 1%
Number of sensors support Up to 3 units
Radio controlled signal DCF 77 / MSF (depend on country version)
WIRELESS SENSOR
Dimensions (W x H x D) 65 x 100 x 35mm
Main power
2 x AA size 1.5V batteries
(Lithium battery recommended for low
temperature environment)
Operating temperature range -20°C to 60°C ( -4°F to 140°F )
Operating humidity range RH 1% to 99 % (non-condensing)
RF frequency 433MHz
RF transmission range 30 meters
Errors and technical changes reserved. / Manual_7006405_Tendence-WSX_en_BRESSER_v092019a
Bresser GmbH Gutenbergstr. 2 · DE-46414 Rhede · Germany · www.bresser.de · service@bresser.de
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bresser 7006405 TENDENCE WSX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bresser 7006405 TENDENCE WSX in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bresser 7006405 TENDENCE WSX

Bresser 7006405 TENDENCE WSX Snelstart handleiding - Nederlands - 20 pagina's

Bresser 7006405 TENDENCE WSX Gebruiksaanwijzing - Deutsch - 3 pagina's

Bresser 7006405 TENDENCE WSX Snelstart handleiding - Français - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info