655585
6
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
6
O W N E R ' S M A N U A L
C A R D I O C O M F O R T PA C E R
Start training by pressing START/STOP button.
If you have set target/targets, the target/targets
start to count down. During training you can
scale the load by SELECTION DIAL.
3. USER PROGRAM
The program profile used last time is displayed.
You can either start training with your personal
memorized training targets by pressing START/
STOP or modify the program. The program
profile bar (1/20) that can now be modified
blinks. If you want to change, modify the
blinking bar and confirm. Next bar will blink.
After the last bar, the display switches back to
the first bar. By pressing the ENTER button for
2 seconds you can finish the profile modifying.
Now program is ready with your memorized
personal training data (time, distance, energy
targets and heart rate limit). Modify your
targets if needed. Start training by pressing
START/STOP button.
If you have set target/targets, the target/targets
start to count down. During training you can
scale the load by SELECTION DIAL
4. HEART RATE CONTROL (H.R.C.)
Select your age and confirm. Select between
four different training intensities (55%, 75%,
90% or TARGET.) By selecting TARGET you can
insert target heart rate.
Start training by pressing START/STOP button.
If you have set target/targets, the target/targets
start to count down.
During the training the equipment will
automatically adjust the resistance so that
your heart rate target will be reached and
maintained.
5. CONSTANT WATT
Set target power in watts and target time and/
or distance and/or energy consumption and/or
upper heart rate limit by SELECTION DIAL.
Start training by pressing START/STOP button.
If you have set target/targets, the target/
targets start to count down. During training the
equipment will adjust resistance dependently
on your pedaling speed, so that target power
level is achieved and maintained. You can
change the target power by SELECTION DIAL.
6. RECOVERY
Start the recovery calculation after training
by pressing RECOVERY button. Recovey
heart rate calculation can be started only if
the heart rate measurement is activated and
the heart rate value is shown on the display
The measurement takes 60 seconds. After 60
seconds, the display shows your recovery index
F1-F6 (F1 = best result). To get back to main
menu, press RECOVERY button once again.
SETTING USER DATA
Right after restarting the meter you can choose
the user. Select the user and confirm. Personal
exercise data (time, distance, energy, heart
rate limit and age) will be memorized and
recalled as defaults every time when the user is
selected.
ADDITIONAL NOTES
1. For speed and distance you can choose
either metric or English units by using the KM/
ML switch located on the back cover of the
meter. The power cord has to be unplugged
and replugged to apply the change.
2. If you are not training and buttons are
not pressed, the meter switches into the
Sleep mode after about four minutes. Room
temperature is displayed.
3. Training is paused for a maximum of 4
minutes by pressing the START/STOP button.
Pressing the button again allows you to
continue the paused training session using the
previous training data.
4. Entering training targets (time, distance,
energy, heart rate limit) is possible only in the
STOP mode (not during training).
5. This equipment cannot be used for
therapeutic purposes.
6. Energy consumption is calculated based
on average values. The energy expenditure is
displayed in kilocalories. To convert this into
joules, use the formula: 1 Kcal = 4.187 KJ.
7. If you are training with heart rate
measurement (either chest belt or handgrip
heart rate) you can set maximum heart rate
limit. When limit is exceeded while training
meter will give alarm beeps.
8. Preset programs are divided into 20 steps.
Duration of the one step depends on the time
set for the whole training. If time is not set,
duration of one step will be 100 m in distance.
9. If you have set targets to count down, a
signal sounds and training automatically stops
when any of target reaches zero. You can restart
training by pressing START/STOP.
10. Note that recovery index is in relation to the
heart rate frequency in both the beginning and
Cardio Comfort Pacer_090807.indd 6 8-7-2009 13:37:57
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bremshey-Cardio-Comfort-Pacer

Zoeken resetten

  • Hoe het paneel met programma.s resetten,ik had tijd 30 minuten geprogrammeerd en nu blijft dit staan en knoppen reageren niet meer

    hilde1007@hotmail.com Gesteld op 16-5-2020 om 11:02

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bremshey Cardio Comfort Pacer bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bremshey Cardio Comfort Pacer in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Zweeds, Fins als bijlage per email.

De handleiding is 5,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info