714040
14
Verklein
Vergroot
Pagina terug
1/188
Pagina verder
ENGLISH
14 RelaX
2
GETTING OUT OF YOUR WHEELCHAIR INDEPENDENTLY
(Fig. 5)
The wheel locks should be on;
The hinged footplates should be hinged up;
With one hand on each armrest, the person should bend
slightly forward to bring the body weight to the front of the seat,
and with both feet firmly on the ground, one foot well back,
push up into the upright position.
Fig. 4
Fig. 5
WARNING!
When standing, do not stand on the footplates or the
wheelchair will tip up. It is easier and safer to get into your
wheel chair if you turn the footplates up and out of the way or
take them off the wheelchair.
Always engage the wheel wheel locks when transfering in or
out of the wheelchair.
Options – Step Tubes
STEP TUBES
Tipping tubes are used by attendants to tip a wheelchair over an
obstacle Simply step on the tube to push a wheelchair, for
example, over a kerb or step, (Fig. 6).
Fig. 6
CAUTION!
Sunrise Medical strongly recommends the use of a step tube on
transit wheeled models and also on any model where attendant
use is the predominant intended use, as damage to the
backposts may occur if you pull back on them to tip the
wheelchair, in order to overcome obstacles.
Options - Wheel locks
WHEEL LOCKS
Your wheelchair is equipped with two wheel locks. They are
applied directly against the tyres. To engage, press both brake
levers forward against the stops. To release the locks, pull the
levers back to their original positions.
FOLDING UP
The backrest can be swung
forwards to enable
transportation of the
wheelchair. Secure the
backrest so that it cannot
accidentally fall , remove
the safety splint (1)and then
fold the backrest forwards.
To get a smaller folding
package the seat cushion
and the back shell can be
removed.
WARNING!
Risk of injury – the backrest
must be secured/held
before releasing it.
To get the backrest back
into the upright position,
fold the backrest up and fit the splint.
DANGER!
Risk of injury – you must make sure that the backrest is
correctly secured!
Make sure that the back shell is
locked in place correctly.
QUICK-RELEASE AXLES ON
REAR WHEEL
The rear wheels are equipped with
quick-release axles. The wheels
can thus be fitted or removed
without using tools. To remove a
wheel, simply depress the quick-
release button on the axle (1) and
pull the wheel off the axle (Fig. 3).
CAUTION!
Hold the quick-release button on the axle depressed when
inserting the axle into the frame to mount the rear wheels.
Release the button to lock the wheel in place. The quick-release
button should snap back to its original position.
GETTING INTO YOUR WHEELCHAIR INDEPENDENTLY
(Fig. 4)
The wheelchair should be pushed up against a wall or solid
piece of furniture;
The wheel locks should be on;
The footplates should be hinged up;
The user can then lower himself into the chair;
The footplates should then be pushed down and the feet
rested on them in front of the heel loops.
Fig. 1
1
Fig. 2
Fig. 3
1
Handling
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Breezy RelaX 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Breezy RelaX 2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Zweeds, Fins als bijlage per email.

De handleiding is 4,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info