580540
5
Verklein
Vergroot
Pagina terug
1/98
Pagina verder
5
ENGLISH
Diagram 5
Bluetooth setup
5. T7 audio inputs
T7 can play audio either wirelessly from a compatible
Bluetooth device or through a wired connection from
a device with an analogue output.
T7 will select between its Bluetooth and wired inputs
automatically although the Bluetooth input has
priority. The following input selection rules apply:
If T7 is connected via Bluetooth and a plug is
inserted in the Auxiliary input socket, T7 will
switch to the Auxiliary input.
If T7 is playing audio through its Auxiliary input
and a Bluetooth stream is received or the
Bluetooth button is pressed, T7 will switch to the
Bluetooth input.
If T7 is playing audio through its Auxiliary input
and the cable is disconnected T7 will switch to
the Bluetooth input and attempt to connect to
the primary paired source device.
Note: If T7 is connected via Bluetooth while an
Auxiliary input cable is also connected, a new
analogue audio signal will not automatically
switch T7 to its Auxiliary input.
5.1 Bluetooth connection
To connect T7 to a Bluetooth enabled audio device it
must rst be “paired” with the device. Once paired, a
Bluetooth device and T7 will “remember” each other
and be able to connect when within range.
T7 will remember up to eight paired Bluetooth
devices. The rst paired device will be designated
as the “primary” device, additional devices will be
designated as “secondary” devices.
The primary device will be connected when within
range, and the T7 Bluetooth button is pressed.
Secondary devices will not connect automatically
when in range but must be connected via their
Bluetooth settings.
It is possible for two paired devices to be connected
to T7. However, audio will only be heard from one
device at any one time. When two devices are
connected the other device can override the active
stream.
To pair a Bluetooth device with T7 follow the steps
described below.
With T7 switched on, press and hold the
Bluetooth button for 2 seconds. The indicator
will ash and T7 will provide audible feedback
when it enters “pairing” mode.
Note: T7 will automatically exit from Bluetooth
pairing mode if no device is paired within 5
minutes.
Open the Bluetooth settings on the source device
and ensure Bluetooth is switched on. Once
discovered, Bowers & Wilkins T7 will appear as
an available Bluetooth device. Select T7 and close
the Bluetooth settings. T7 Bluetooth indicator will
ash as pairing is underway and illuminate fully
when pairing is established. T7 will also provide
audible feedback when pairing is established.
Note: If your Bluetooth audio source device does
not support “simple” pairing and requests a four
digit code, enter ‘0000’.
Once a connection has been established, ensure
that T7 is selected as the speaker output. Audio
will now be heard through T7.
2 seconds
Devices
Bowers & Wilkins T7
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowers-Wilkins T7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowers-Wilkins T7 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 10,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info