562446
5
Verklein
Vergroot
Pagina terug
1/113
Pagina verder
5
ENGLISH
With this connection scheme the majority of audio
programme formats can be reproduced through
selection of the appropriate Panorama 2 input.
Note: For further information on connecting
Panorama 2 to a wide variety of audio sources
a Panorama 2 Connection Guide is available
for download from the Bowers & Wilkins web site
at www.bowers-wilkins.com
In addition to the mains, HDMI and subwoofer
sockets, a service socket is also present on the
Panorama 2 connection panel. The service socket is
not intended for consumer use. Figures 5 illustrates
and identies all the Panorama 2 connection
sockets.
2.3 Panorama 2 Subwoofer Connection
An active subwoofer can be connected to Panorama
2. A subwoofer can enhance the Panorama 2
experience by providing extra impact on movie
soundtracks and extending bass response on stereo
music programmes.
The subwoofer is connected via the Panorama 2
subwoofer output socket. Connect one end of an
RCA phono cable to the socket and the other end of
the cable to the subwoofers input socket.
Ensure that the subwoofer is switched on. As
Panorama 2 handles the appropriate low-pass
ltering on its subwoofer output, the subwoofer’s
internal low passlter should be set to its maximum
or switched off. Initially set the subwoofer’s volume
level control to between half and three-quarters
maximum thenne control its volume via the
Panorama 2 subwoofer level setup menu (See
Paragraph 4.1).
3. Using Panorama 2
Panorama 2 is simple to operate with commonly
used functions available on both its front panel
and remote control handset. It has two operational
modes: Normal Mode and Setup Mode. When
Panorama 2 is switched on from standby it will start
up in normal mode.
Setup Mode, which requires the Panorama 2 to be
connected using HDMI to a television input for on
screen display, is selected via the remote handset
OSD button. Panorama 2 front panel controls are
described in Section 3.1, the remote handset is
described in Section 3.2, and Panorama 2 setup is
described in Section 4.
3.1 Panorama 2 Front Panel Controls
The Panorama 2 front panel display incorporates
a standby button and indicator with a proximity
and touch sensitive screen. When Panorama 2
is switched on, the display screen is operational
only when it senses an operator’s hand nearby.
Furthermore, the display only makes available
the options inherent to the specic Panorama 2
installation. For example, if only two out of the four
Panorama 2 inputs are connected, the display will
make only those two inputs available for selection.
Figure 6 illustrates the Panorama 2 front panel
controls.
Standby
Figure 6
Front panel controls
Figure 5
Panorama 2 connection sockets
HDMI out
optical/aux sub out
®
HDMI 1 HDMI 2 HDMI 3
service
Audio Mode
VolumeInput
Indicator
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bowers-Wilkins-Panorama-2

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowers Wilkins Panorama 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowers Wilkins Panorama 2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Zweeds, Noors als bijlage per email.

De handleiding is 14,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info