548963
3
Verklein
Vergroot
Pagina terug
1/61
Pagina verder
3
ENGLISH
www.bowers-wilkins.com
2. Connecting To Your MM-11. MM-1 Carton Contents
MM-1 connection sockets are found on the back
and the underside of the powered speaker. Those on
the underside are the power input socket, the USB
socket and the slave speaker socket. Those on the
back are the line input socket and the headphone
output socket. The connection sockets are illustrated
above.
Connecting the Slave Speaker
The slave speaker incorporates a captive cable that
connects to the slave speaker connection socket
on the underside of the powered speaker. The plug
on the end of the captive cable is a push t into the
slave speaker socket. The slave speaker incorporates
a facility in its base to coil any spare cable. See
illustration above right for coiling spare cable.
USB Connections
If you wish to listen to audio either stored or streamed
on your PC/Mac, connect from a spare USB socket on
the computer to the USB socket on the underside of
the powered speaker. Use the USB cable supplied.
Note: If an alternative USB cable is used it should
be no longer than 3m (10 ft).
MM-1 Powered Speaker
MM-1 Slave Speaker
Power Supply
Power Cable
USB Cable
Stereo Mini-jack cable
Remote Control Handset
Document pack containing a Quick Start Guide,
warranty information and statutory safety warnings.
Environmental Information
All Bowers & Wilkins products are
designed to comply with international
directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical
and Electronic Equipment (WEEE). These symbols
indicate compliance and that the products must be
appropriately recycled or processed in accordance
with these directives. Consult your local waste disposal
authority for guidance.
Power supply manufacturer: EG BILLION
Power supply type: PAT051A16EU
Power supply input: 100-240 V~, 50/60 Hz, 1,5 A,
Class II, IP X0
Power supply output: DC 16 V, 3,2A
Aux Input
If you wish to listen to an alternative analogue audio
source, TV audio or your PC/Mac analogue audio
output for example, connect it to the MM-1 aux in
socket on the back of the powered speaker using the
mini-jack cable supplied.
The MM-1 aux in socket and USB input operate in
parallel so that audio signals present on either will
be heard simultaneously. This allows, for example,
computer alert sounds to be heard via the USB input
even while audio is playing from an alternative analogue
source through the aux input.
Connecting the Power Supply
Connect the MM-1 Power Supply to a mains outlet
socket using the supplied mains cable. Now connect
the Power Supply output cable to the MM-1 power
input socket. When rst connected to mains power the
MM-1 will automatically enter standby mode with its
indicator illuminating red.
Note: The table on page 5 describes all the MM-1
indicator colours and their meanings.
Headphones
A stereo mini-jack headphone socket is tted to the
back of the powered speaker. Insertion of a headphone
plug will mute the MM-1 speakers.
SLAVE SPEAKER
R
1
1
1
1
1
Contents
ENGLISH 2
1. MM-1 Carton Contents
3
2. Connecting To Your MM-1
3
3. Positioning MM-1 4
4. Using MM-1 4
5. MM-1 Firmware Update
5
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bowers-Wilkins-MM-1

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowers Wilkins MM-1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowers Wilkins MM-1 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans, Pools, Zweeds, Noors als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info