706254
4
Verklein
Vergroot
Pagina terug
1/81
Pagina verder
4
ENGLISH
Connections
In addition to a mains power socket
your
Formation Bass carries an Ethernet socket
for
connection to a router should a wired network
connection be preferred to wireless (WiFi).
Note: The USB socket located on the Formation
Bass rear panel is intended for service and
diagnostic use only. It cannot be used for any
other purpose.
The Formation Bass has no wired audio connections
and will congure itself automatically during the
setup process to access network audio streams
and to enhance bass appropriately depending on
the characteristics of the partnered speaker. When
partnered with a Formation Bar, the Formation Bass
will automatically switch to reproducing the low
frequency effects (LFE) channel of Dolby Surround
encoded material.
Switch On and Off
With all connections made, and the Bowers &
Wilkins Home app installed on your mobile device,
your Formation Bass is ready to be set up. Your
Formation Bass has no mains power switch and,
following a short start-up routine, will be operational
as soon as it is connected to mains power. It will
play an audio prompt when its startup routine is
complete.
When a Formation Bass that has not been previously
used is rst switched on it will automatically enter
setup mode to enable its connection to your home
network and to any other available Formation
devices. Setup mode is indicated by a slow amber
pulse illumination of the Form touch button
.
The Formation Bass will also appear in the Bowers
& Wilkins Home app as available for set up after
selecting ‘Add Formation product’ from the app
Settings page.
Your Formation Bass manages its operational state
and power consumption entirely automatically and
will switch to a power saving mode after twenty
minutes of inactivity. There is no need ever to switch
off your Formation Bass, however should you wish
to do so, simply disconnected it from mains power.
Your Formation Bass will retain its settings without
mains power.
You can restart a Formation Bass speaker by a short
press and release of the reset button located on its
rear panel
. Pressing the button will switch the
Formation Bass off and on again. All settings will be
retained when your Formation Bass restarts. You can
also restart your Formation Bass via the Bowers &
Wilkins Home app Settings page.
If you wish to reset your Formation Bass to its
default settings, press and hold the reset button for
ve seconds. On restart, your Formation Bass will
enter setup mode. All settings will be deleted when
your Formation Bass resets. You can also reset your
Formation Bass via the Bowers & Wilkins Home app
Settings menu.
Network Setup
With your Formation Bass in setup mode, with its
Form button
illumination pulsing slowly amber,
launch the Bowers & Wilkins Home app on your
iOS or Android device. The app will guide you with
prompts though the setup process.
Note: Formation Bass employs a Bluetooth
connection to the device running the Bowers
& Wilkins Home app during the setup process.
Bluetooth signals have a relatively short range
and can be interrupted by room boundaries, so
we recommend that your Formation Bass and
Bowers & Wilkins Home app device remain in
close proximity during the setup process.
The Bowers & Wilkins Home app will rst search
for Formation products in setup mode and display
a screen inviting the selection of one. Tap to select
your Formation Bass. If you have already set up a
Formation product and are adding an additional
one, select ‘Add Formation product’ from the app
Settings menu.
The Bowers & Wilkins Home app will next invite
you to name the “space” in which your Formation
Bass is to be used. A list of default space names
is provided but you can also create your own.
When you have selected, or created, a space
name, the app will ask you to touch the Form
button
on the top of your Formation Bass to
conrm the selection.
Diagram 2
Formation Bass rear panel
If a wireless network connection for your
Formation Bass is to be used, the next setup
stage will connect your Formation Bass to your
home WiFi network. The app will ask you to
conrm the correct WiFi network and ask you to
input its password. Alternatively, if your Formation
Bass is connected to your network router using an
Ethernet cable, this stage of the setup process will
be bypassed.
Note: If you already have other Formation
products connected to your WiFi network,
Formation Bass setup will not require you to input
the WiFi password.
With WiFi network conguration, and space
selection complete, your Formation Bass is ready
for use. Your Formation Bass will play an audio
prompt to conrm successful set up.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowers Wilkins Formation Bass bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowers Wilkins Formation Bass in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 8,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info