719222
4
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
2
Panel Descriptions
Top Panel
Eect setting knobs
Used to make eect settings for the
ME-80 (p. 5 to p. 11).
Display
Various information about the ME-80 is
shown here.
MEMO
BATTERY LOW indicator on the
display will blink if the batteries
are low. Replace them with new ones.
[OUTPUT LEVEL] knob
Controls the volume of the Gt. AMP OUTPUT jacks and REC OUT/PHONES jack.
Buttons Explanation
[EXIT] button Pressed to go back to previous pages or cancel actions.
[WRITE] button Pressed to save/copy your patch settings (p. 12).
[CTL] button Pressed to set the functions of the [CTL] pedal in Memory Mode (p. 16).
[EDIT] button Pressed to enter Memory Edit Mode (p. 13).
Expression pedal
By strongly pressing the
toe end of the pedal, you
can turn the pedal eect on
and o (PEDAL FX indicator
will light/go out).
Pedal eect is o:
The pedal controls volume.
Pedal eect is on:
The pedal controls the eect (e. g. : wah)
that you select with the [PEDAL FX] knob.
Pedal switches
In Memory Mode, the pedal switches select banks and patches. In Manual mode, the pedal switches turn each eect on/o individually.
[MEMORY/MANUAL] pedal
Switches between Memory Mode and Manual Mode (p. 12).
To turn on the tuner, hold down the pedal for at least two seconds (p. 4).
What is Memory Mode?
You can load 72 patches that are the combinations and sound settings of
eects. Out of 72 patches, you can save up to 36 (4 patches x 9 banks) of
them to user bank (9 preset banks, 9 user banks). You can use the pedal to
switch between bank and patch immediately.
What is Manual Mode?
You can turn the eects on and o by using the pedals. You can turn the
eects on and o just like turning eects pedals mounted on an eects
board on and o individually.
In Memory Mode
Use the pedals shown below to switch between bank and patch.
Switch banks.
Switch patches.
Operate functions that have
been specied on p. 16.
In Manual Mode
Use the pedals shown below to turn an eect on and o individually.
Turn eects (COMP, OD/DS,
MOD, DELAY, AMP, EQ, REV) on
and o.
Checking knob positions
In Memory Mode (p. 12), the positions of knobs on the panel may not match the actual values of parameters.
You can get the actual parameter values to appear in the display so you can check them.
1. Turn the knob you want to check while holding down the [EDIT] button.
The value of the knob will be displayed for a limited time.
When the knob position matches its value, the tuning guide on both sides of the display will light.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Boss ME-80 - Guitar Multiple Effects bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Boss ME-80 - Guitar Multiple Effects in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 70,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info