794392
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
English | 26
Commissioning
Fully charge spexor before using it for the first time.
This can take up to 8 hours depending on the ambient
conditions.
Launching the app
Start the app.
Log in with your e-mail address and password.
If you have forgotten your password, you can reset it in
the app.
You can now use the app to operate and configure spexor.
English | 27
Commissioning
Adding alarm devices
You can also control multiple alarm devices with your smart-
phone. There is no limit to how many. You can add more
alarm devices in the app. To do this, the alarm device to be
added must be turned on and the app must be running.
Scan the QR code contained in the Quick Start Guide
delivered with the alarm device to be added. If you do
not want to authorize access to your camera, you can
also manually enter the 8-digit device number of your
QRcode.
Safely store the Quick Start Guide with QR code so it can
be used later.
English | 28
The spexor app is the communication interface for your
alarm device. You can use it to monitor different states of the
alarm device everywhere, such as the battery charge.
You can also manage your user account information,
activate or deactivate monitoring or the alarm function, add
more alarm devices, use help topics, or book additional
features or services later.
Operation
English | 29
Monitoring
Placing it where you want to monitor
– Note –
Risk of damage! The alarm device is not protected
against moisture and water. Penetrating water or
moisture can damage or destroy the alarm device.
Keep the alarm device away from water or other liquids.
– Note –
Exposure to fire and heat! Excessive heat can damage
the battery or sensors. Protect the alarm device from heat
and keep it away from heat sources such as radiators or
stoves and from open flames.
English | 24
Commissioning
Load the app on any other smartphone and use the same
access data during installation.
Switching on alarm device
In its as-delivered condition, spexor is switched off and its
battery may be severely discharged.
Switch on spexor at its ON/OFF switch.
The battery needs a minimum charge for this. If the
battery charge is too low, spexor is automatically
switched on when the charging process begins.
An acoustic signal confirms the switch-on. After switching
on, the LEDs light up white briefly. While spexor boots up,
they light up green six times.
English | 25
Commissioning
Charging the battery
– Note –
Charge the battery of the alarm device only with the
charger supplied by the manufacturer. If a charger
designed for a particular type of battery is used with other
batteries, then there is a risk of fire.
During charging, the ambient temperature should be
between 0 °C and +40 °C.
Use the USB cable to connect the Micro-USB port of
spexor to the power supply unit.
Connect the power supply unit to the mains power.
The LEDs flash white three times sequentially around the
LED array bar thereby indicating the power supply unit has
been detected and the charging process has begun.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch Spexor bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch Spexor in de taal/talen: Engels als bijlage per email.

De handleiding is 1.5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bosch Spexor

Bosch Spexor Snelstart handleiding - Deutsch - 2 pagina's

Bosch Spexor Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info