700711
7
Verklein
Vergroot
Pagina terug
1/71
Pagina verder
Robert Bosch Hausgeräte GmbH 7
en
Operation
Universal cutter with blade
The universal cutter with cutter blade is suitable
for cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts, almonds.
With the universal cutter XL use the appliance
at full power to prepare honey spread
(according to the recipe see
Fig.
).
Always observe the maximum quantities and
processing times in the table (
Fig.
).
Caution!
Before cutting meat, remove gristle, bones and
sinews.
The universal cutter with cutter blades is not
suitable for cutting very hard food (coffee
beans, radishes, nutmeg) and frozen food
(fruit, etc.).
Fig.
– with cutter blade (sizes L and XL)
Fig.
– with ice crusher blade (size L only)
Place the universal cutter on a smooth,
clean work surface and press.
Insert the blade.
Add food.
Warning!
Blade must sit straight in the universal cutter
so that the attachment sits correctly
(Fig.
=
/
-3).
Place the attachment on the universal
cutter and rotate in a clockwise direction
until it “clicks” into position.
Place the base unit on the attachment and
lock into position.
Insert the mains plug.
Hold the base unit and universal cutter
firmly and switch on the appliance (turbo
speed).
Release the On button after processing.
After using the appliance
Remove mains plug.
Press the release buttons and remove the
base unit from the attachment.
Rotate the attachment in an anti-clockwise
direction and remove from the universal
cutter.
Take hold of the blade by the plastic handle
and take out.
Place the lid on the universal cutter to keep
in the processed ingredients.
Universal cutter with Vario set (only size
XL)
The universal cutter with Vario set is suitable
for cutting hard, dry food (e.g. chocolate, nuts,
almonds, Parmesan) or for crushing ice cubes
into small (
S
), medium (
M
) or large (
L
) pieces.
The size is specified by positioning the marks
S
,
M
or
L
on the Vario filter insert when
inserting it into the Vario holder.
Information and recommendations concerning
settings, quantities and processing times can
be found in the table (Fig.
).
Fig.
Place the universal cutter on a smooth,
clean work surface and press.
Insert Vario holder into the universal cutter.
Pegs on the universal cutter must be
located in the grooves of the holder.
Place Vario filter insert on the universal
cutter.
The marks (S/M/L) must be positioned
above the peg of the universal cutter
according to the required degree of
cutting (Fig.
-2).
Insert Vario blade.
Add food.
Warning!
Vario blade must sit straight in the Vario filter
insert so that the attachment sits correctly
(Fig.
-3a).
Place attachment on the Vario filter insert
and turn clockwise until it clicks into
position.
Place the base unit on the attachment and
lock into position.
Insert the mains plug.
Hold the base unit and universal cutter
firmly and switch on the appliance (turbo
speed).
Release the On button after processing.
The blade is sharp and can cause
injury!
The universal cutter must be completely
assembled before use!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade by
the plastic handle only.
Do not touch blade with bare hands.
Clean them with a brush.
MSM6_Zubehör 1 mit VarioChopper_alle.book Seite 7 Mittwoch, 18. Februar 2015 7:29 07
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch MSM6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch MSM6 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info