786482
12
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
12 | English
1 609 92A 2P5 | (14.11.16) Bosch Power Tools
Assembly
Delivery Scope
Please also observe the representation of
the delivery scope at the beginning of the op-
erating instructions.
Before assembling the saw stand, check if all
parts listed below are provided:
Assembling the Saw Stand
Carefully remove all parts included in the delivery from
their packaging.
Remove all packaging material.
Setting Up the Saw Stand (see figures A1A2)
Lay the saw stand upside down on the floor (legs facing up-
ward).
Push the locking pin 11 in and tilt the leg upward until the
locking pin can be heard to engage.
Repeat this workstep with the other three legs.
Turn around the saw stand to the working position.
Ensure that the saw stand is stable and that all locking pins
have engaged.
The saw stand is easily aligned with the height-adjustable leg
8.
Screw the leg in or out until the saw stand is aligned level
and all four legs face against the floor.
Mounting the Workpiece Support (see figure B)
Insert the workpiece support 1 into the table extension 3.
Tighten the locking knob 2 to lock the workpiece support.
Repeat the worksteps with the second workpiece support.
Preparing the Saw Stand
Preparing the Attachment Sets (see figures C1C4)
To release the attachment sets 5, press buttons 12 each
and open the levers 13.
–Measure the distance x between the mounting holes and
your power tool.
Position the attachment sets 5 centred on the saw stand
and at the matching clearance x to each other.
–Lock the levers 13 again. The attachment sets are now
firmly positioned on the saw stand.
Fastening the Power Tool to the Attachment Sets
(see figure D)
Position the power tool in the transport position.
Notes on the transport position are given in the operating
instructions of the respective power tool.
Position the movable nuts 14 in the attachment sets so
that they match the mounting holes of the power tool.
Screw the attachment set and the power tool with the hex-
agon bolts and the washers from the fastening kit 15 using
the provided open-end spanner 10.
Operation
Working Advice
Do not overload the saw stand. Always observe the maximum
carrying capacity of the saw stand and the two table exten-
sions.
Always hold the workpiece firmly, especially the longer and
more heavy section. After cutting through the workpiece, the
centre of gravity may become dislocated in such an unfavour-
able manner that the saw stand tips over.
Extending the Saw Stand (see figures E1E2)
Long workpieces must be underlaid or supported at their free
end.
Place your long workpiece onto the saw table of the power
tool.
Loosen locking knob 7 and pull the table extension 3 out to
the desired clearance.
Retighten the locking knobs again.
Loosen locking knob 2 and adjust the height of the work-
piece support 1 so that the workpiece rests level.
Retighten the locking knobs again.
Sawing Workpieces of the Same Length
(see figure F)
The material stop 4 can be used for easily sawing workpieces
to the same length.
Tilt the material stop 4 upward.
Position the workpiece support 1 at the desired clearance
to the saw blade of the power tool.
Maintenance and Service
Maintenance and Cleaning
If the saw stand should fail despite the care taken in manufac-
ture and testing, repair should be carried out by an authorised
customer services agent for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the saw stand.
Accessories
No. Designation Quantity
Saw stand GTA 2500 Compact 1
5Attachment set 2
1Workpiece support 2
10 Open-end spanner 1
15 Power tool fastening kit
consisting of:
Hexagon bolt (M8 x 45)
–Washer 4
4
Article number
Attachment set 2 610 948 662
Workpiece support 1 619 PA2 498
OBJ_BUCH-1463-003.book Page 12 Monday, November 14, 2016 1:03 PM
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GTA 2500 Compact bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GTA 2500 Compact in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info