794382
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Mounting instructions
The standards and directives applicable in your
country must be observed during planning, set-up,
operation and maintenance.
The controller can be used in a horizontal position
or mounted on the wall.
When selecting the mounting location and when
drilling, pay attention to the areas where electrical
wires run, or to any supply cables.
Please also note any additional information on the
product.
Always lay the cables of connected devices in such
a way that they cannot pose a hazard to people or
pets.
For electronic devices (Smart Home hubs, routers,
power supply units, etc.), radio interference may
occur under some circumstances if the distance
between the devices is less than one metre. If this
occurs, please select a larger distance between the
devices.
Screws and plugs are not included in the box
contents. Fillister head screws or cylinder head
screws with a head diameter of max. 8 mm and a
head height of max. 4 mm are recommended.
Start-up
Insert the network cable into the controller network
connection (9) and a free LAN port on your Wi-Fi
router. Now insert the cable for the power supply unit
supplied into the controller supply connection (10).
Then plug the power supply unit into a free socket. The
status LEDs (2, 3, 4) show the status of initialisation
after starting through flashing codes (see product
overview).
When you connect the controller to the internet
for the first time, it automatically searches for
software updates. If an update is required, it is
automatically downloaded and installed by the
controller. This process can take more than 30
minutes. The controller cannot be started during
this time. Please do not disconnect the controller
from the power for the duration of the process.
The Smart Home controller II requires Ipv4 in
the local network This is usually the standard
configuration for your router.
Download the “Bosch Smart Home” app from your app
store. You will need this for installation, configuration
and operation.
QR code for the
Apple App Store
QR code for the
Google Play Store
To configure the controller, your mobile device
must be on the same network.
Start the Bosch Smart Home app and follow the
instructions.
The Bosch Smart Home system can be used by other
mobile devices. To do this, first install the Bosch Smart
Home app on the additional mobile device and follow
the instructions in the app.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch BSHC-2 - Smart Home Controller II bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch BSHC-2 - Smart Home Controller II in de taal/talen: Engels als bijlage per email.

De handleiding is 0.23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bosch BSHC-2 - Smart Home Controller II

Bosch BSHC-2 - Smart Home Controller II Gebruiksaanwijzing - Deutsch - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info