555077
7
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
7
Vacuum Cleaner
DEAR CUSTOMER!
Congratulations on the purchase of BORT product,
which has progressive design and high quality. We
hope that our products will be your companion for
many years.
For the ef cient and safe use of the product, please
read this manual and save it for future reference.
SPECIFICATIONS 1
MAINTENANCE INSTRUCTIONS 2
1. Handle
2. 2-in-1 Tool
3. Air Escape Pushbutton
4. crevice Tool
5. Hose
6. Release Button
7. Telescopic Tube
8. Floor brush
9. Handle Of Dust
10. Release Button Of Dust
11. Cyclone dust container
12. Switch Pedal
13. Tube Support
14. Power plug
15. Cord reeling pedal
ATTENTION: All schematic pictures may differ from the
actual product
COMPLETE SET
Standard complete set of the product includes:
Vacuum Cleaner
Hose
Telescopic tube
Crevice nozzle
Multi brush
Brush for upholstery and carpets
Owner’s manual
Due to the constant improvement of the technical
characteristics of the models, we reserve the right to
make changes in construction and/or complete set of
product.
SAFETY AND SECURITY
1.Be sure to use the cleaner in compliance with the
contents of this manual, and use the ttings designated
by the manufacturer.
2. Please do not leave the cleaner when it is powered
on. Turn off the power switch and pull out the power
plug when not using or before maintenance.
3. Please do not pull or carry the cleaner by the power
cord, or nip it when closing a door; keep the cord free
from the press of the cleaner.
4. Please do not let children take the cleaner as a toy,
and close attention is necessary when the cleaner ap-
proaches children.
5. Please do not use the cleaner when its power cord or
plug is damaged. Send it to the appointed service cent-
er. Please do not unplug by pulling the cord or plug. To
unplug, grasp the plug, not the cord.
6. Never pull the power plug or use the cleaner with
wet hands.
7. When using the cleaner, pay attention to prevent any
hair roll or other rubbish block up the air inlet (includ-
ing the hose and the spile), otherwise motor failure and
housing distortion may be caused. If the matters ab-
sorbed in forms a blockage, stop the cleaner by pulling
out the power plug immediately to clean the blockage.
8. When using the cleaner, don’t plug up the air outlet
by towel or other matters, otherwise the ef ciency of
dust absorbance will be in uenced, and the motor will
be at high risk of being burnt out.
9. Never use the cleaner at uneven oor or ground;
and be very careful when cleaning stairs to prevent the
cleaner from falling down.
10. Never absorb live stumps with the cleaner, other-
wise the motor may be damaged.
11. The cleaner should be kept far away from heat
sources (such as central heating, oven, etc) to avoid
the distortion of plastic parts as well as the in uence
caused by such distortion.
12. Before using the cleaner, please remove big and
sharp matters on the oor to avoid damaging the plas-
tic parts, lter gauzes and motor.
13. Never absorb water or other liquid with this cleaner,
otherwise, the motor will be damaged.
14. This appliance is not intended for use by persons
(including children), with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety.
ASSEMBLY INSTRUCTIONS
1. Before assembling the cleaner, please con rm all
parts and components for the cleaner are received by
referring to Parts and Components List.
2. Please remember to cut off the power supply before
assembly.
ASSEMBLY OF HOSE
1. As is shown in Figure (3), insert the hose into the
duct inlet of the machine body in horizontal direction.
Please pay attention to the alignment of two projecting
parts. Turn the hose right when it is pushed into the
bottom, a click of inserting sound may be heard, i.e. the
hose is assembled into the machine body completely.
2. ASSEMBLY AND REMOVAL OF DUST
BARREL
As is shown in Figure (4), place the bottom of the dust
barrel on the projecting part at the front end of the
machine body, and press down the dust barrel. When
the front-end hook is entered into the corresponding
part of the machine body completely, and a click of
inserting sound is heard, which indicate that the dust
barrel is assembled in place. To remove the dust barrel,
press down the handle of the dust barrel; when the
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bort BSS-1800N-ECO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bort BSS-1800N-ECO in de taal/talen: Engels als bijlage per email.

De handleiding is 2,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info