471903
17
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
17
NL
FR
D
EN
Maintenance
Always disconnect the extractor before doing
any maintenance.
Cleaning
The extractor must be cleaned regularly, both
inside and outside. Use a cloth with a neutral
detergent for cleaning. Do not use abrasives!
Note: Not observing the cleaning standards for
the extractor and for replacing and cleaning
the filters may create a fire hazard. You are
therefore requested to follow the instructions.
Grease filter
The grease filter must be cleaned once a
month with mild detergents, by hand or in the
dishwasher at a low washing temperature and
with a short washing cycle.
Carbon filter (filter version only)
The carbon filter may not be washed or reused.
The carbon filter must be replaced at least
once every 4 months.
Lamp replacement
If the BORETTI LUMINA LED illumination is no
longer working, please call Boretti’s technical
service.
Caution
Never a use the extractor when the grease fil-
ters are not fitted correctly! The extracted air
may not be discharged into a duct that is also
used for extracting smoke from devices which
do not run on electricity.
Always ensure that the room is well ventilated
when the extractor and any other appliances
are used. Cooking on open flames under the
extraction hood is strictly forbidden. Open
flames will damage the filters, electronics, mo-
tor and illumination and can start a fire. When
frying, watch out constantly that hot fat does
not catch fire.
Strictly observe the technical and safety regu-
lations for the extraction of smoke as laid down
by the relevant local authorities.
time will set the timer at 20 minutes and but-
ton E will flash three times repeatedly.
To switch off the delay timer, press button E
once again.
Filter indication
Button F will flash to indicate when your grease
filters need cleaning (after 40 hours’ opera-
tion) and when the carbon filters need to be
replaced (after120 hours’ operation) if you are
operating in recirculation mode.
You can easily reset the filter indication by
pressing button F.
Hint
Switching on the extractor creates a current
of air. However, it can take a moment before
this current takes effect, which may create the
impression that the extractor is not working
properly. It is therefore advisable to set the
extractor at low speed a few minutes before
you start cooking, so that the air current can
already be effective when you start cooking;
this will also allow you to keep using your ex-
tractor at the lowest speeds. In this way your
extractor makes the least noise, uses the least
energy and gives the best results.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Boretti SHV 1290 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Boretti SHV 1290 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info