497099
8
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
ENGLISH
General
Congratulations on purchasing the Bobike junior, the safe and
comfortable bicycle child seat from the Bobob line. Read these
instructions for assembly and use carefully before assembling the seat.
Store these instructions in a safe place for future reference.
The Bobike is suitable for the transportation of children in the age
category 5 to 10 years old. The maximum permitted weight is 32 kg.
The seat is not intended for use on mopeds. Consult your supplier
if you have any questions regarding the assembly or use of the
Bobike junior.
• Use the Bobike maxi assembly set to assemble the Bobike junior.
These sets can also be purchased separately.
When reusing the insert, it may be necessary to raise the saddle
slightly so that the Bobike junior will fit properly.
Assembly
Attach the plug-in element (H) to the upright rear fork under the
saddle – the counter element is tightened with spanner 13 (with
the flat side facing the rear fork). Ensure that the plug-in element
is mounted horizontally and with the T-shaped opening in the
correct position (wide slot on top) (fig. 5).
Attach both mounting studs (C) approximately 30 cm under the
plug-in element (H) perpendicular to the rear fork (fig. 1). The
mounting studs are suitable for rear forks with a ø of 12 to 25 mm
(fig. 2). To adjust, insert the clamping bracket in the front, middle
or rear slot.
Ensure that the elements on both the left and right are mounted at
exactly the same height. Screw the bolt hand-tight with the Allen key
and completely unscrew the stud on the assembly stud.
Now take the seat and insert the head of the mounting bracket (G)
straight and completely into the plug-in element (fig. 5).
Turn the footrest bar (B) to the correct position, place the ends in
the assembly studs (C) and screw the studs tight.
Adjustment. The seating surface of the Bobike junior must slope
gently to the rear. Ensure that there is a sufficient gap between the
seat and the baggage holder or mudguard. To improve the position
of the seat, move the assembly studs (C) up or down. When the
correct position has been achieved, screw the assembly stud bolt
tight.
Foot support (D) height adjustment. You can set the foot rest at 4
heights by screwing the Allen bolts into the lowest and top holes of
the washer plate (fig. 3).
Safety regulations: After assembling the Bobike junior check that
the gap between the back of the child safety seat and the rear axle
is no more than 30 cm before using the seat with your child (fig. 4).
Put your child into the Bobike junior and check that the chosen
setting is correct. Always take the child out of the seat before
changing the setting.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bobike Junior bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bobike Junior in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info