626835
8
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
1110
SECTION 6: CLEANING
6.1 AFTER-USE CLEANING
• Add 1 cup of hot water and 1 drop of liquid dish soap to the blender jar�
• Place the lid tightly on the jar� Place the jar on the blender base and press
“Pulse” for 5 seconds�
• Rinse with clean water until all soap is rinsed from the jar and lid�
• Place the jar and lid on a dish rack or dry by hand with a soft cloth�
• Unplug the blender base and clean it by wiping the base and control surface
with a damp cloth�
6.2 LONG-TERM SANITATION
• For long-term sanitation, fill the blender jar with hot water�
• Add appropriate amount of liquid chlorine bleach�
• Stir for 10 seconds� Let the mixture stand in the jar for 5 minutes�
• Empty the water/bleach mixture� Turn the jar upside down on a dish rack to dry�
6.3 CLEANING TIPS AND CAUTIONS
• Do not use stiff-bristled brushes or abrasive cloths/pads to clean the
blender base or jar; using such materials will scratch and dull the surface�
• Never submerge the blender motor base in water� Avoid submerging
the blender jars for more than 5 minutes� If water penetrates the lower jar
seals, the life of the jar will decrease�
• The blender jar is dishwasher safe on the top rack only� However,
extreme temperatures (over 185ºF, 85ºC) can damage the jar material�
Blendtec recommends hand-washing the jar to prolong the life of the jar�
SECTION 7: TROUBLESHOOTING
While Blendtec does not expect you to have any problems with your blender,
sometimes failures do occur� Use the following guidelines to troubleshoot any issues
7.1 NO POWER
If the blender motor will not turn on, try the following:
• Determine whether the LCD display is lit� If the LCD display is not lit, the
unit lacks power�
• Ensure the main power switch on the back is turned on�
• Check your house circuit breaker switch or fuse to ensure it is set to the
ON position�
• Unplug the power cord, wait 5 seconds and then plug the cord back in�
• If blender still fails to function, call 1-800-BLENDTEC or 801-222-0888�
7.2 ERROR MESSAGES
• Overload: This message indicates an overload on the motor� Turn off
and unplug the unit� Remove the blender jar from the motor base, and
turn the shaft by hand to ensure the blade turns freely� If the blade does
not move freely, check for any obstruction in the jar� The problem may
also be the jar itself, not the motor� If the blade moves freely, plug in
the unit and turn the blender on� If the overload condition reoccurs, call
1-800-BLENDTEC or 801-222-0888 for further assistance�
• Overtemp: This message indicates that the motor is overheating� The
blender has been disabled until the unit cools to operating temperature�
Turn off and unplug the unit� Allow it to cool for at least 20 minutes�
• E-05 (Reset Error): This message indicates a permanent failure of the
electronics in the unit� Call 1-800-BLENDTEC for repair/replacement (see
Section 8: Warranty)�
• E-04 (No Zero Crossing): This message indicates failure of a component
on the electronic board� Call 1-800-BLENDTEC for repair/replacement
(see Section 8: Warranty)�
7.3 NOISE-LEVEL CHANGES
If the blender noise has increased from the original levels, determine
whether the sound is coming from the blender motor or jar�
• Blender motor: Remove the jar, and press “Pulse” � Listen to the
motor� If it is excessively noisy, call 1-800-BLENDTEC for evaluation�
• Jar: After checking the motor, fill the jar with 2 cups of water and
place back on the motor base� Run the blender for a few seconds by
pressing If you have more than one jar, test a different jar to
determine whether the sound is different� If a jar is exces sively noisy, or
if the blade assembly seems loose or sounds gravelly when turned by
hand, call 1-800-BLENDTEC�
7.4 UNSATISFACTORY BLENDED TEXTURE
If the blended texture of the mixture is lumpy or uneven, do the following:
• Ensure the mixture is not cavitating during the cycle� Cavitation is a
condition in which an air pocket forms in the mixture because the
mixture is too cold or too solid, causing the blender blade to spin freely�
To correct this problem, increase the mixture temperature by reducing
the ice, increasing the liquid and/or ensuring the frozen ingredients
used in the recipe are not too cold�
• If the recipe is mixing well but has not had enough time to completely
blend, try a longer cycle or touch and hold “Pulse” for extra blending time�
• If none of the preceding suggestions work, call 1-800-BLENDTEC�
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blendtec Signature Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blendtec Signature Series in de taal/talen: Engels als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Blendtec Signature Series

Blendtec Signature Series Gebruiksaanwijzing - Français - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info