626842
15
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
2726
SECTION 5: CARE AND CLEANING
5.1 CLEANING AFTER USE
1Add hot water and 1-2 drops of liquid dish soap to the blender jar�
2� Place the lid tightly onto the jar, place the jar on the motor base and press and
hold the pulse button for 5-10 seconds
3� Rinse all soap from the jar and lid with water�
4� If the jar is stored upside down, shake excess water from the jar after cleaning
Note: WildSide+™ and FourSide™ jars can be stacked to save space.
5.2 LONG-TERM SANITATION
1Sanitize the jar per local code by filling the blender jar with a sanitizer diluted
to the manufacturer’s specifications� Bleach, properly diluted, can be used
2� Leave the diluted sanitizer in the jar for 5 minutes
3� Empty the sanitizer from the jar�
4� Rinse jar thoroughly with water�
5� If the jar is stored upside down, shake excess water from the jar after cleaning
5.3 MOTOR BASE AND SOUND ENCLOSURE CLEANING
Ensure the blender is unplugged before cleaning�
Wipe down the plastic housing of the motor base, gaskets, metal top and
sound enclosure with a clean, damp rag� A mild, all-purpose, nonabrasive
cleaner may be used
The drive socket can be cleaned using a cotton swab or toothpick
For Stealth blender models, the sound enclosure can also be removed for
cleaning, when necessary�
Open the sound enclosure lid and use both hands to pull outward on the
lid at the pivot joints� This step will flex the plastic enough for it to spread
and clear its mounting tabs�
The sound enclosure base can be removed in a similar fashion by pulling
outward at the base of the sound enclosure and flexing the outer walls
enough to clear the mounting tabs�
5.4 CLEANING TIPS AND CAUTIONS
Do not use stiff bristled brushes or abrasive cloths/pads to clean the blender
base, jar or sound enclosure as this will dull or scratch the surface�
Do not use a water jet of any kind to clean the motor base
NEVER submerge the motor base in water� Doing so will void the warranty
Avoid submerging blender jars for more than 5 minutes� Water penetration
through the lower jar seals will reduce the life of the jar�
SECTION 6: TROUBLESHOOTING
While we don’t expect you to have any problems with your blender,
sometimes failures do occur� Use the following guidelines to see if the
problem is easily fixed or requires service�
6.1 BLENDER MOTOR WILL NOT TURN ON (NO POWER)
If the blender motor will not turn on, try the following:
For the Stealth 875 and Chef 775 look to see if the control surface has an
illuminated power icon, for the Stealth 885, Connoisseur 825, EZ 600 and
Chef 600 determine if the Liquid Crystal Display (LCD) is lit� Absence of those
indicators indicates a lack of power to the unit
Check your circuit breaker switch or fuse to make sure it is set to the
ON position�
Unplug the power cord from the wall receptacle, wait 5 seconds, then plug
power cord back in
6.2 ERROR MESSAGES ON DISPLAY
STEALTH 875™/STEALTH 885™
Touch Error — This indicates that more than one touch sensor on the blender has
been touched� To avoid this message, touch the center of the desired button�
If this icon remains on when no one is touching the touch area, unplug and re-plug
in the blender� If the problem persists please contact your Blendtec Service Agent�
Overtemp Error — This indicates that the motor is overheating� The blender has
been disabled until the unit cools to operating temperatures� If the blender does
not work after 20 minutes or more of cooling time, please call your Blendtec
Service Agent
Overload Error — This indicates an overload on the motor�
1� Clear the error message by pressing any button or turning the blender off and
on again�
2� Remove the jar, and run the blender to determine whether the issue relates to
the jar or the motor�
3� With the jar removed, check for blockage in or around the socket on the motor
base and the blade assembly on the jar�
4� Place the jar securely on the motor base, and touch to pulse the blade through
the mixture�
5� Ensure the jar is not loaded with excessively hard or thick ingredients�
If overload condition re-occurs, contact your Blendtec service agent�
Reset Errors — If the following error messages appear, reset the error by
pressing the cancel button or cycle the power by unplugging your blender
and then plugging it back in� If the error does not clear, contact your
Blendtec service agent
Error: Overtemp� condition detected
Error: Overload condition detected
Error: Temp� sensor not detected
Error: Zero crossing not detected
Error: Reset error detected
Error: Read / Write error detected
Error: Motor control error detected
Error: Invalid blend cycle
Error: Touch controller not detected
Error: Touch controller output is invalid
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blendtec EZ 600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blendtec EZ 600 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Blendtec EZ 600

Blendtec EZ 600 Gebruiksaanwijzing - English, Français, Espanõl - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info