626810
3
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
ENGLISH
4 5
Never attempt to repair the blender base.
Never remove the blender motor cover. The blender motor does
not contain self-adjustable or serviceable parts. A qualied service
agent must make all service adjustments. Removing the cover or
attempting to service the blender will void the warranty.
Power off machine when not in use.
The power switch on all Classic blenders and the Pro750 is located on
the back of the blender motor cover. The o button for all Designer
Series and Professional 800 blenders is found in the top right corner
of the touchpad.
Avoid touching the blender drive socket or jar shaft
after use!
The blender drive socket and jar shaft may become very hot after
blend cycles.
Special safety instructions regarding the
Blendtec Go accessory.
NEVER operate the Blendtec GO accessory unless the cup
is securely attached to the micronizer.
NEVER use soup cycle or operate the blender for more than
60 seconds with the GO accessory attached.
Safety
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
Above Counter Installation
Select a location that is near an electrical outlet. Also consider
proximity to ingredients, as well as available counter space.
Place the blender on the counter in a spot where the air intake
vents on the sides and exhaust on the back of the blender are
unobstructed.
Ensure there is enough room above and around the unit to allow
for unhampered movement of the sound enclosure, if applicable.
Plug the unit into an outlet with appropriate electrical protection.
For Pro 750 In-Counter installation instructions, please see
online user manual: https://www.blendtec.com/support/guides
This blender is intended for home use only! Any use
of this blender for commercial purposes voids all
warranties.
Never operate the blender with more than the marked
capacity of the jar.
Save these instructions for future reference. For more information, please visit www.blendtec.com.
Read all instructions carefully before using the Blendtec® blender.
Following these instructions will help prevent injuries and damage
to the machine which will ensure that you have the best possible
experience with the blender.
Avoid contact with moving parts.
ALWAYS keep ngers, hands, hair and clothing away from
all moving parts.
ALWAYS keep all utensils away from the drive socket and blender
jar blade during operation as utensils may damage the blade or
the blender jar.
NEVER put hands into the blender jar or add substances by hand
when the blender jar is on the motor base.
NEVER touch the blade with your ngers whether it is on or
o the motor base.
NEVER place jar into drive socket if blender motor is operating.
DO NOT rock or remove the blender jar during operation.
These precautions will help prevent personal injury
and/or damage to the blender.
Never operate the blender if it appears damaged.
If the blender malfunctions, call an authorized Blendtec service
agent immediately. If it is dropped or damaged in any way, return
the blender to a Blendtec service agent immediately for examination,
repair, electrical or mechanical adjustment, or possible replacement.
Never operate blender in liquid.
To protect against the risk of electrical shock, do not put the motor
base in water or other liquid. Do not use the blender outdoors where
it may get wet. This will void the warranty.
Never put non-food items into jar.
Utensils, rocks, glass and other non-food items are dangerous if
placed in the jar. Damage caused by such foreign objects will void the
warranty. Keep hands and utensils out of the jar while blending to
reduce the risk of severe injury to persons or damage to the blender.
Utensils may only be used when the blender is not running.
Never operate the blender without the lid in place.
This product should NOT be used for more than 5
continuous minutes.
Never operate the blender using attachments not
sold by Blendtec.
Use of any unauthorized attachments may cause re, electric shock,
and/or injury and will void the warranty.
Blender jar must be properly in place while appliance
is operating.
Warning, do not blend hot liquids or other hot
ingredients.
Starting blend cycles with boiling or very hot liquids may result
in burns or cause the lid to blow o.
Use caution when blending on the hot/soup cycle.
When blending on the Hot Soup cycle, friction of the blade will heat
the contents. The vented lid will allow pressure relief. Be careful not
to come in contact with any steam coming from the clear center lid.
Power cord precautions
NEVER operate with a damaged cord or plug. If the supply
cord is damaged it must be replaced by the manufacturer
or authorized service agent to avoid a hazard.
DO NOT permit the cord to hang over the edge of the work
surface.
NEVER use an extension cord with the unit.
Unplug the blender motor when not in use, before changing
blender locations, or cleaning.
IMPORTANT SAFEGUARDS
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blendtec DESIGNER 725 EXPRESS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blendtec DESIGNER 725 EXPRESS in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 2.1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Blendtec DESIGNER 725 EXPRESS

Blendtec DESIGNER 725 EXPRESS Gebruiksaanwijzing - English - 23 pagina's

Blendtec DESIGNER 725 EXPRESS Gebruiksaanwijzing - Français - 22 pagina's

Blendtec DESIGNER 725 EXPRESS Gebruiksaanwijzing - Espanõl - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info