716230
13
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Product Specications
Voltage 230-240V
Power 800W
Variable Speed 800 – 3000 SPM
Bevel Angle 0 - 45°
Orbital Positions 3
Stroke Length 20mm
Maximum Material Thickness 80mm Wood, 8mm Steel
Dust Extraction Yes
Weight 2.7Kg
Materials You Can Cut
This jigsaw is a versatile tool that allows you to cut many different types of materials. Some of these materials include:
Wood products such as lumber, hardwood, plywood, composite board, and panelling
• Drywall
Fibre board and plastic
Metals such as pipe, steel rods, sheet steel, aluminium, brass and copper.
NOTE: There are many different types of blades available. Generally, there are metal cutting blades (fine teeth) and wood cutting
blades (coarse teeth). Use the correct blade for your application. The packaging on the blade will indicate the type of materials each
blade is designed to cut.
General Cutting
Clearly mark the workpiece to locate the position of the cut.
Hold smaller workpieces with a vice. Clamp larger workpieces to a workbench or table.
WARNING Any workpiece that is not adequately clamped in place may come loose and cause serious injury. Never hold the
workpiece with your hand.
WARNING Keep hands and fingers away from between the motor housing and blade holder. Do not reach underneath workpiece
while jigsaw is running.
Rest the front of the jigsaw base on the workpiece and align cutting edge of the blade with the cutting line on your
workpiece Make sure the power cord is out of your way and not in the path the blade will follow.
While firmly gripping the jigsaw, and with the blade NOT in contact with the surface to be cut, start the jigsaw by pressing the
lock-off button and squeezing the trigger switch.
Once the jigsaw has reached the desired speed, gradually bring the moving blade into contact with the workpiece at the
appropriate location.
NOTE: Do not force the jigsaw. Use only enough force to keep the blade cutting. Excessive pressure on the blade will cause it to
bend and twist, which may result in breaking the blade.
Metal Cutting
Many types of metal can be cut with your jigsaw. When cutting any kind of material, be careful not to twist or bend the blades. Do
not force the blade. If the blade vibrates excessively, use a finer toothed blade. If the blade heats excessively, reduce the speed of
cutting.
Clamp all work firmly and jigsaw as close as possible to the clamping point to eliminate any vibration of the work being cut.
When cutting conduit, pipe or angle iron, clamp work in a vice if possible and saw close to the vice. To cut thin sheet materials place
the material between hardboard or plywood and clamp the layers to eliminate material vibration and tearing. By doing this, the
material will be cut smoothly. Lay out your pattern or cutting lines on top of the ‘sandwich.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blaupunkt STSK 757301 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blaupunkt STSK 757301 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info