716234
17
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
WARNING: Unbalanced blades will cause the lawnmower to vibrate-risk of accident!
1. Disconnect the mower from power supply before removing or refitting the blade.
2. Turn the mower unit on to its side.
3. Firmly grip the end of the cutting blade - with a gloved hand.
4. Remove the fixing bolt, with the spanner provided.
5. Carefully remove the cutting blade.
6. Ensure that the ‘New cutting blade is the correct way up, with the turned edges facing towards the motor.
7. Locate the ‘New blade into position on the carrier pins. The blade with texts should face outward.
8. Secure the fixing bolt and tighten.
9. Return the mower unit to an upright position.
POWER SUPPLY CABLE
Before use, the power supply cable should be inspected for signs of damage or ageing.
DO NOT USE ANY POWER TOOLS IF THE CABLE IS DAMAGED OR WORN.
NOTE: All electrical inspections and repairs should be conducted by a qualified electrician.
STORAGE FOR LONGER PERIODS
NOTE: To ensure your mower is maintained in good working order, if the storage period exceeds one month it is important
that the following is adopted:
1. Clean all areas of the mower, ensure that the grass collection box is empty and clean.
2. Lubricate the wheels, pivot points and linkagesn.
3. Cover all metal parts with oil to prevent corrosion.
4. Cover the mower with a protective sheet and store in a dry area.
NOTE: Switch off the machine, unplug the power cord and wait until all moving parts have completely stopped before cleaning
and/or maintenance.
• Do not flush the machine with water.
The penetration of water can damage the electrical parts.
• Clean the machine with a dry cloth, brush or the equivalent.
NOTE: Have the machine checked by an authorised service centre if:
–– The lawn mower blade strikes an object. –– The motor suddenly stops.
–– The blade is bent (do not attempt to straighten it).
–– The motor shaft is bent (do not attempt to straighten it).
–– There is a short-circuit/electrical fault when the power cord is plugged in. –– The gear or drive is damaged.
–– The V-belt is damaged.
SHARPENING/REPLACING THE BLADE
The blade should be checked and if necessary sharpened and/or balanced at the end of the season by a qualified person.
The insulation on the machine should also be checked in conjunction with removing the blade at the end of the season.
Storage
Clean the machine well on completion of the work. Allow the motor to cool before putting the machine away. Store the machine in
a dry place.
The machine will take up less space if the top handle is folded down. Unscrew the wing nuts about 6 turns.
IMPORTANT: Make sure the power cord is not clenched when folding down the handle.
!
!
!
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blaupunkt RAMK 750301 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blaupunkt RAMK 750301 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info