614605
12
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
25
München CD 43
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Press the CLR button > for appro-
ximately 14 secs. until “CLR.3” is
shown in the display.
The TPM memory for all disks is clea-
red.
Clearing the TPM memory with DSC
The DSC function of this set allows you to
completely clear the memory of one or se-
veral CDs.
With the update function you can confirm the
TPM programming for all CDs which shall be
kept in the TPM memory.
To clear the TPM memory for certain disks
simply do not confirm the corresponding
TPM programming. Proceed as follows:
Press DSC 7.
Press
/ F until “UP-D” (update)
appears in the display.
After a short period of time the display
shows “LOAD”.
Now insert the CD the TPM memory of
which shall be maintained. The display
shows “READ”. The disk will be
ejected automatically.
Insert the next CD.
Go through this procedure again for all disks
for which you wish to maintain the TPM
programming.
Finally press the TPM button < longer
than 2 seconds.
Press button 7 to switch the DSC
mode off.
All disks which have been inserted remain in
the TPM memory. All others are cleared.
The SCAN function 2
This function allows you to sample all CD
tracks one after another for about 10 secs.
each.
To activate SCAN
press knob 2.
The following music tracks will be scanned
for approx. 10 secs. each.
With the TPM function being activated (dis-
play 9 f lights up), the set only samples the
tracks stored in the TPM memory. To conti-
nue listening to the scanned track
press the SCAN knob 2 once again.
The set will then continue to play the
track without any interruption.
The Mix function @
When the Mix function is activated, the CD
tracks will be played in an arbitrary order.
Display 9 c shows “Mix”.
If TPM is on (display 9 f lights up), the set
only plays the tracks stored in the TPM
memory. To skip a title press rocker switch
F.
Press button @ to switch “Mix” on and off.
ARI traffic messages
Certain FM broadcasters transmit regional
traffic messages at regular intervals. The
ARI system makes it a lot easier to find these
stations.
You are listening to a traffic station if “ARI” is
shown in display 9 d.
Activating priority for traffic stations
Selecting this function makes the car radio
mute all other non-traffic-stations. Therefo-
re, to listen to traffic stations only
press the ARI button C.
If the priority for traffic stations is on,
“ARI” lights up in display 9 d.
If you have not tuned in to a traffic station, the
set will send out an audible alarm.
In this case press the seek tuning rok-
ker switch F to let the unit search for
the next traffic station.
Audible alarm
Precondition: Priority for ARI traffic stations
is on (“ARI” lights up in display 9 d).
When you leave the coverage area of the
traffic station and the reception quality beco-
mes too poor, the set will send out an audible
alarm after approximately 30 secs.
This audible alarm will also be produced
immediately after having pressed a preset
key with a non-ARI station allocated to it.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blaupunkt Munchen CD 43 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blaupunkt Munchen CD 43 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Blaupunkt Munchen CD 43

Blaupunkt Munchen CD 43 Gebruiksaanwijzing - Nederlands - 16 pagina's

Blaupunkt Munchen CD 43 Gebruiksaanwijzing - Deutsch - 16 pagina's

Blaupunkt Munchen CD 43 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info