EN
4
expose it to static electricity or dust, do not immerse it in water.
Place the memory card in the slot on the back of the phone,
withits chip facing down, as shown on the device.
Please be careful when using a memory card, especially when it is
removed. Some memory cards must be formatted with a
computer before use.
4.3. Insert battery
1. Insert the battery chip into the protruding metal point in the
battery slot, insert the battery, and push the top down until the
battery engages in the recess.
2. Put back the back cover.
4.4. Remove the battery
To remove the battery, turn off the device, remove the cover and
then remove the battery at the top.
Note:
Please remove the battery when it is switched off, as it may cause
abnormal operation when the device is switched on.
4.5. Charging the battery
Connect the charger to the appliance and plug the other end into
the socket. If the device is turned on while charging, the battery
icon will move in the right corner of the display. Charging is
completed when the charging indicator on the top right is lit. If
charging is switched off, a charging indicator appears on the
display. When charging is complete, unplug the charger from the
unit.
Note: When the battery voltage is low, a warning message is
displayed on the display. Charge the battery as soon as you can, to
avoid any inconvenience, the device can be switched off during a
telephone conversation. Your device can automatically turn off
when the power level is too low.
