526083
4
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
4
ENGLISH
u Hold the appliance at an angle as shown.
u Fill the appliance with water using the beaker provided.
u Close the water tank cover.
Warning! Never ll above the maximum lling level (11).
Normal tap water can be used, but if you live in a hard water
area the use of distilled water is recommended. Do not use
chemically descaled water.
Use
Warning! Do not leave the appliance unattended while it is
connected to the power supply and during the cool down period.
Temperature setting
The required temperature setting depends on the garment
fabric.
u Adjust the temperature control dial (1) to the required
setting:
- Synthetics
- •• Silk/wool
- ••• Cotton/Linen
If you are unsure of thebre content of a garment, start with a low
temperature setting and test on a small area (seam or inside hem).
If wrinkles remain, gradually increase the heat setting until you nd
the optimum setting.
Using as a dry iron
u Stand the appliance on its heel rest (13).
u Plug the appliance in and switch on.
u Set the steam control dial (4) to the no steam position (g. B).
u Adjust the temperature control dial (1) to the required setting.
The heating light (2) will switch off when the appliance has
reached the required temperature.
Using as a steam iron
u Fill the water tank as described above.
u Stand the appliance on its heel rest (13).
u Adjust the temperature control dial (1) to the required
steam setting.
The heating light (2) will switch on. When the heating light
switches off, the iron will be ready for use as a steam iron. The
heating light will regularly switch on and off whilst ironing.
u To create steam, set the steam control dial (4) to the
required steam position.
u Plug the appliance in and switch on.
Using the steam burst button
The steam burst feature can only be used whilst ironing on a
high temperature setting.
u Make sure that there is water in the tank and the
temperature control dial (1) is set to the steam position.
u Lift the appliance and press the steam burst button (5).
You may need to press a few times to activate the pump.
u Let the appliance cool down before leaving it unattended and
before cleaning or inspecting any parts of the appliance.
u The power supply cord should not touch the hot soleplate
during use or during the cool down period.
u Do not touch the soleplate until it has cooled down.
u Wait until the appliance has cooled down before emptying
the water tank as the water may still be hot.
u Do not immerse the appliance, cored set or plug in liquids
u Always disconnect the appliance from the supply before
lling, emptying, cleaning, or carrying out any
maintenance on the appliance.
u The plug must be removed from the socket-outlet before
the water reservoir is lled with water
u The iron must be used and rested on a stable surface
u The iron is not to be used if it has been dropped, if there
are visible signs of damage or if it is leaking.
Features
1. Temperature control dial
2. Heating light
3. Self-clean button
4. Steam control dial
5. Steam burst button
6. Spray button
7. Water tank cover
8. Spray nozzle
9. Soleplate
10. Water tank
11. Maximum lling level indicator
12. Cord storage
13. Heel rest
Beforerstuse
Cleaning the soleplate
u Make sure that the appliance is unplugged.
u Fill the appliance with water as described below.
u Use the self-clean system as described below. When
nished, wipe the soleplate and steam vents with a cloth.
Some parts of the appliance have been lightly greased and as
a result the appliance may smoke slightly when switched on
for the rst time. This will cease after a short while.
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.
Fillingthewatertank(g.A&B)
In order to be able to use the steam function or the spray
feature, you will rst need to ll the water tank with water.
u Make sure that the appliance is unplugged.
u Set the steam control dial (4) to the no steam position (g. B).
u Open the water tank cover (7).
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black en Decker XT2030 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black en Decker XT2030 in de taal/talen: Engels, Italiaans als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info