578022
4
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
4
ENGLISH
To re-fit the locking key, place the key into the hole (6) as
shown and twist it 1/4 turn.
Refit the battery cover and let it click into place.
Fitting the battery (fig. A & B)
Remove the battery cover (4) from the tool.
Connect the battery to the connector. The larger battery
terminal connects to the smaller connector terminal.
Refit the cover and let it click into place.
Installing the tool (fig. C & D)
The tool can be installed on a horizontal surface such as a floor
or a table. Alternatively, the laser head can be mounted to a
wall using the bracket (3). The laser head can also be hung
from a joist or other secure structure using a hanging strap.
Note: the laser lines will only be level if the tool is kept within
5° from vertical. If the tool is kept outside the level range,
the projected laser lines become dashed instead of solid.
Re-adjust the position of the tool if any or both lines are
dashed.
Fitting the tool to the mounting bracket (fig. C)
Mount the bracket (3) to a wall following one of the
procedures as described below.
Install the unit by clinging the magnet (7) to the steel knob
(8).
To remove the unit from the bracket, pull the unit off the
steel knob.
Hanging the laser head (fig. D)
Thread the hanging strap through the slot in the top of the
tool and fasten the hook as shown.
Adjust the tool so that it hangs relatively level.
Wall mounting (fig. E)
The unit can be mounted to walls using one of the mounting
facilities of the bracket (3).
Keyhole wall mount
The keyhole (9) is used for mounting to most wall constructions.
Drive a screw or nail into the wall.
Hang the bracket onto the fastener by the keyhole (9).
Fit the tool to the bracket.
Wall pins
If the unit is mounted to drywall or other soft materials,
the wall pins (10) must be used:
Hold the bracket in front of a suitable location.
Twist the knobs (11) to press the pins (10) straight into the
wall.
Fit the tool to the bracket.
Use
Install the tool as required.
If necessary, fit the unit to the mounting bracket to
position the laser line.
Be aware that extreme temperature changes can cause
movement or shifting of building structures, tripods,
equipment, etc. This may affect accuracy. Verify your
set-up before each use as the laser may have moved.
Extreme temperature changes may affect the adjustment
of the unit.
Adjusting the laser lines (fig. C)
The adjusting knobs on the mouting bracket facilitate
adjustment of the laser lines.
To move the line in vertical direction, turn one of the
knobs (12) on either side of the bracket.
To move the line in horizontal direction, turn one of the
knobs (13) on either side of the bracket.
Switching on and off
To switch the tool on, slide the on/off switch (1) to the
right into the desired operating mode.
To switch the tool off, slide the on/off switch to the utter
left position.
Selecting the operating mode (fig. F)
In order to project a horizontal line, slide the switch (1) to
position A.
In order to project a vertical line, slide the switch (1) to
position B.
In order to project a crosshair, slide the switch (1) to
position C.
Cleaning and maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker LZR6 T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker LZR6 T1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Noors, Fins als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info