474474
5
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
5
Using a cloth placed over the blade (23),
grip the blade and, using the spanner
provided (20), tighten the nut (21) in a
clockwise direction.
Switchbox operation (Fig. E)
E
We strongly recommend that prior to
connecting your mower to the mains, you
understand fully the switchbox operation.
The operation is as follows:
To start your mower
Grasp the handle (7) with both hands.
Tilt your mower slightly to one side.
Note: Failure to do this may result in an
unsightly ring being cut in your lawn.
Remove your left hand from the handle
(7) and depress the lock-off button (15).
Whilst this button is depressed, grasp
the switchbox lever (14) with your right
hand and squeeze towards the handle (7).
Your mower will now operate.
Release the lock-off button (15) and
return your left hand to the handle tube.
Note: If the lock-off button (15) is not
depressed in the order above, your mower
will not operate and the lever (14) will not
engage with the switch. This is a safety
feature!
To stop your mower
Tilt your mower slightly to one side.
Note: Failure to do this may result in an
unsightly ring being cut in your lawn.
Release the switchbox lever (14).
When your mower has stopped rotating,
lower it back onto the lawn.
Handle operation (Fig. F)
F
The normal operating range of the handle is
shown in Fig. F, as angle F1. This should
enable a comfortable working position to
be achieved.
If you wish to store your mower by hanging it
on the wall (angle F2), proceed as follows:
Disconnect it from the mains.
Remove the grassbox.
Lower the handle to the bottom of its
normal range, then pull the handle
towards you and lower it to the ground.
(Do not drop the handle as it may
damage the switchbox.)
Your mower can now be lifted and stored on
the wall if required.
ENGLISH
Height of cut adjustment (Fig. D & G)
G
The cut height of your mower is adjusted by
means of blade spacers (22 & 24). The
method for this operation is as follows:
Ensure your mower is disconnected from
the mains supply.
Turn your mower onto its side so that the
underside of the cutter deck (1) is
exposed.
Using a cloth placed over the blade (23),
grip the blade and, using the spanner
provided (20), undo the nut (21) in an
anti-clockwise direction.
Remove the blade nut, spacers and
blade (21-24) and re-assemble to give
the cut height required. See Fig. G,
showing the 6 cut heights available.
D
Once the cut height is selected, re-
assemble the blade, ensuring the cutter
blade (23) is assembled with the cutting
tips downwards as shown in Fig. D.
Ensure the blade nut (21) is tight.
Note: Your mower is supplied with a cut
height of 11mm (Fig. G).
Always re-fit 3 spacers and never fit more
or your mower will become unsafe.
Carrying your mower (Fig. H)
H
Disconnect your mower from the mains.
Remove the grassbox, lower the handle to
the flat “park” position and then, holding one
handle near the pivot block and carry with
the blade pointing away from you.
How to use your mower (Fig. J)
!
Observe all of the relevant warnings when
using your mower.
We recommend the directional method of
operation to obtain maximum cutting
performance from your mower and to reduce
the risk of the trailing extension lead from
entering the cutting path.
Place the bulk of the extension cable
on the lawn close to the starting point
(Fig. J, position 1).
Hold the handle assembly with both
hands.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GX635 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GX635 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info