665777
9
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
9
ENGLISH
(Original instructions)
The cutting blades are made from high quality, hardened steel
and with normal usage, they will not require resharpening.
However, if you accidentally hit a wire fence, stones, glass or
other hard objects, you may put a nick in the blade. There is
no need to remove this nick as long as it does not interfere
with the movement of the blade.
If it does interfere, remove the battery and use a ne toothed
le or sharpening stone to remove the nick. If you drop the
trimmer, carefully inspect it for damage. If the blade is bent,
housing cracked, or handles broken or if you see any other
condition that may affect the trimmer’s operation contact your
local BLACK+DECKER Service Center for repairs before
putting it back into use. Fertilizers and other garden chemicals
contain agents which greatly accelerate the corrosion of
metals. Do not store the unit on or adjacent to fertilizers or
chemicals. With the battery removed, use only mild soap and
a damp cloth to clean the unit. Never let any liquid get inside
the unit; never immerse any part of the unit into a liquid. Pre-
vent the blades from rusting by applying a lm of light machine
oil after cleaning.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Troubleshooting
Problem Possible Cause Possible Solution
Slow running, noisy
or hot blades.
Dry, corroded blades. Lubricate blades.
Blade or blade support
bent.
Straighten blade or blade
support.
Bent or damaged teeth. Straighten teeth.
Loose blade bolts. Tighten blade bolts.
Unit will not start. Battery not installed
properly.
Check battery installation.
Battery not charged. Check battery charging
requirements.
Lock off not fully
operated.
Check lock off is fully
depressed prior to moving
main trigger.
Battery won't
charge
Battery not inserted into
charger.
Insert battery into charger
until green LED appears.
Charge up to 8 hours if
battery totally drained.
Charger not plugged in. Plug charger into a working
outlet. Refer to “Important
Charging Notes” for more
details. Check current at
receptacle by plugging in
a lamp or other appliance.
Check to see if receptacle
is connected to a light
switch which turns
power off when you turn out
the light.
Surrounding air
temperature too hot or
too cold.
Move charger and tool to a
surrounding air temperature
of above 40 degree F
(4.5°C) or below 105
degree F (+40.5°C).
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GTC18452PC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GTC18452PC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info