55610
6
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
6
ENGLISH
Fit the wheel axle (11) to the frame using the screws (12),
washers (13) and nuts (14) as shown in fig. A1.
Turn the shredder into the upright position.
Fitting the collection bag (fig. B)
Place the collection bag (6) under the outlet opening as
shown.
Connecting the appliance to the mains
Note: The UK version may be supplied with a wired in supply
cable or power inlet.
Connect the female socket of a suitable extension cable
to the power inlet (7).
Insert the mains plug into a mains outlet.
Warning! The extension cable must be suitable for outdoor
use and for the power consumption of the appliance.
Use
Warning! Let the appliance work at its own pace.
Do not overload.
Do not switch the shredder off before it is completely
empty, as it may clog and be difficult to restart.
Remove soil and stones from plant roots before shredding.
Firmly hold branches when feeding them into the
shredder.
Switching on and off (fig. C)
Switching on
Set the direction selector (17) to the lower position
(A in fig. C).
Set the power switch (18) to position I.
Switching off
Set the on/off switch to position O.
Emergency stop
In an emergency, hit the stop button (19) to stop the
appliance.
Clearing a blockage (fig. C)
When the material is jammed:
Switch the appliance off.
Set the direction selector (17) to the upper position
(B in fig. C).
Set the power switch (18) to position I until the blockage
is removed.
Warning! Branches may be ejected from the inlet funnel
when the appliance is running in reverse.
If the blockage has not cleared:
Switch off and unplug the appliance.
Use a piece of wood to loosen the debris within the
cutting chamber.
Replace the plug in the mains socket and operate the
appliance as described above to remove any debris.
Warning! Always switch off and unplug the appliance when
removing a blockage. Do not attempt to remove blockages by
hand through the inlet funnel or outlet opening. Keep your
hands clear of the cutting chamber.
Hints for optimum use
Shred dry materials last, as this will help to clear moist
material from the shredder.
Do not allow material to pile up and compost prior to
shredding.
You may feed shreddings into the shredder for a second
time to further reduce their volume.
Refer to the chart at the end of this text.
Maintenance
Your Black & Decker appliance has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
Keep the unit clean and dry.
Do not use any abrasive or solvent-based cleaner.
Regularly clean the ventilation slots in your appliance
using a soft brush or dry cloth.
Adjusting the pressure plate
The pressure plate is factory-adjusted and does not require
adjustment before first use. When the shredded material starts
to hang like a chain as shown in fig. D, adjust as follows:
Switch the appliance on.
Turn the adjustment knob (8) clockwise until you hear a
light grinding sound.
A small amount of aluminium shavings will fall out of the
appliance. The shredded material will now be separated as
shown in fig. E.
Overload protection
This appliance has an overload protection. If the appliance
becomes blocked and the motor stalls, the power will
automatically be switched off.
Wait for a few minutes for the protection to reset.
Clear the blockage as described above.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GS2200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GS2200 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info