586087
4
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
4
The handle (9) comprises the lower handle
(10), upper handle (11), switch box (24),
switch lever (21) and safety lock-off button
(20), electrical supply cable (19), cable clips
(12,13) and the handle clamp assemblies,
which comprise a wing nut (15), washer (16)
and bolt (17).
Assemble the lower handle (10) into correct
locations on your mower body, as follows:
B
The lower handle (10) comes ready
assembled to your mower body (1) by
means of a pivot pin (8), wing nuts (15),
and washers (16). All that is required is to
unfold the handle from your mower body
by lifting, until the handle ends snap into
the correct locations on the sides of your
mower body. Once this is complete the
wing nuts (15) can be tightened.
With the lower handle in position, assemble
the upper handle, as follows:
C
Place the upper handle (11) over the
lower handle (10), with the upper bend
as shown in Fig. A.
Align the lower holes in the upper handle
with the location pins (18) in the lower
handle and press the upper handle onto
these pins.
Align the remaining (upper) holes in both
the upper and lower handles and fit a
bolt (17) through each hole. Fit a washer
(16) to each bolt and fit the wing nuts
(15) on to the bolts. Tighten each one
with hand pressure only.
Note: Do not use a spanner or other
implement to tighten the wing nuts.
When both upper and lower handle tubes
are assembled, fix the cable (19) by means
of the cable clips (12 &13) to the completed
handle, as follows:
D
The lower cable clip (12) fits into the hole
in the lower handle tube (10) and has a
location pin for that purpose.
The upper cable clip (13) fits onto the
upper handle tube (11) and can be
fitted in any position along the upper
side stem.
Having completed the above, secure
the cable to the handle by pushing into
the clip lugs.
Height of cut adjustment (Fig. G)
!
Warning! Disconnect your mower from
the electrical supply before making any
adjustment and give the blade time to stop
rotating: cutting blades are sharp.
Only fit BS1363A approved plugs fitted
with the correctly rated fuse.
The cable wire colours, or a letter, will be
marked at the connection points of most
good quality plugs. Attach the wires to
their respective points in the plug (see
below). Brown is for “Live” (L) and blue is
for “Neutral” (N).
Before replacing the top cover of the
mains plug ensure that the cable restraint
is holding the outer sheath on the cable
firmly and that the two leads are correctly
fixed at the terminal screws.
Fit a
BS1363A
approved
plug
Connect blue
to N (neutral)
Make sure that the
outer sheath of the
cable is held firmly
by the clamp
Fit the
recommended
fuse
Connect brown
to L (live)
240 volts AC only.
Never use a light
socket
!
Warning! Never connect live or neutral wires
to the earth pin marked “E” or .
Note: Do not wire an extension cable directly
into your mower yourself. Instead, take your
mower to your nearest Black & Decker
service agent.
Increased safety can be obtained by having
a qualified electrician install a high sensitivity
(30mA) circuit breaker in the house wiring.
If you do not have such a circuit breaker
installed, or you do not wish to have one
installed, then we strongly recommend that
the electrical power to your mower be
supplied through a high sensitivity residual
current device (RCD). The RCD is designed
to provide a high degree of personal
protection against harmful electric current
should fault conditions occur.
!
Warning! The use of an RCD or other circuit
breaker unit does not release the operator of
your mower from the safety instructions and
safe working practices given in this manual.
Handle assembly (Fig. A - D)
A
Remove the parts from the carton and
familiarise yourself with the individual parts of
your mower.
The main parts of your mower are mower
body (1) which comprises the cutter deck (2),
cutter cover (3), collar (4), motor cover (5),
wheels (6), grassflap (7) and pivot pin (8).
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GR360 TH4C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GR360 TH4C in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans als bijlage per email.

De handleiding is 0,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker GR360 TH4C

Black Decker GR360 TH4C Snelstart handleiding - English - 16 pagina's

Black Decker GR360 TH4C Gebruiksaanwijzing - Dansk, Svenska, Norsk, Suomi - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info