585844
6
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
Do not attempt to cut a branch when the
diameter of the branch exceeds the cutting
length of the tool.
Always remove the battery from the tool and
place the chain cover over the chain when
storing or transporting the tool.
Keep the saw chain sharp and properly ten-
sioned. Check the tension at regular intervals.
Switch the tool off, allow the chain to stop and
remove the battery from the tool before carrying
out any adjustment, servicing or maintenance.
Only use genuine replacement parts and
accessories.
Carry the pole pruner by the handle with the
cutter blade stopped. When transporting or stor-
ing the pole pruner always t the cutting device
cover and dismantle it into its component parts.
Proper handling of the pole pruner will reduce
possible personal injury and injury to others.
Residual risks
Additional residual risks may arise when using the
tool which may not be included in the enclosed
safety warnings. These risks can arise from mis-
use, prolonged use etc.
Even with the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks can not be avoided.
These include:
Injuries caused by touching any rotating/moving
parts.
Injuries caused when changing any parts,
blades or accessories.
Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust
developed when using your tool (example:-
working with wood, especially oak, beech and
MDF.)
Vibration
The declared vibration emission values stated in
the technical data and the declaration of conform-
ity have been measured in accordance with a
standard test method provided by EN 60745 and
may be used for comparing one tool with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Warning! The vibration emission value during
actual use of the power tool can differ from
the declared value depending on the ways in
which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to determine
safety measures required by 2002/44/EC to protect
persons regularly using power tools in employ-
ment, an estimation of vibration exposure should
consider, the actual conditions of use and the
way the tool is used, including taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is running
idle in addition to the trigger time.
Pruning
Before attempting to prune a tree, ensure there are
not by-laws or regulations that would prohibit or
control the felling of the tree.
Be aware of the direction a branch may fall.
Consider all conditions that may affect the
direction of fall, including:
-the length and weight of the branch to be cut
-the intended direction of fall
-any unusual heavy limb structure or decay
-the presence of surrounding trees and
obstacles,
-including overhead lines
-the intertwinement with other branches
-the speed and direction of the wind.
Consider access to the tree limb.
Tree branches are liable to swing towards the tree
trunk. In addition to the user, any bystander, build-
ing or object below the branch is at risk of being
struck by the branch.
Safety of others
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for the their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Warning symbols
The following warning symbols are found on the
tool:
:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
6
ENGLISH
(Original instructions)
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GPC1800P TH1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GPC1800P TH1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker GPC1800P TH1

Black Decker GPC1800P TH1 Snelstart handleiding - English - 16 pagina's

Black Decker GPC1800P TH1 Gebruiksaanwijzing - Polski - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info