583267
1
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
2
Trimmer
GL570/GL580
Safety instructions
Read all of this manual carefully, observing all the
recommended safety instructions before, during and
after using your machine. Maintain your machine in
good working order.
Familiarise yourself with the controls on your machine
before attempting to operate it, but above all, be sure
you know how to stop your machine in an emergency.
Retain this manual and all other literature supplied
with your machine for future reference.
Electrical connection
Your machine is designed for use on AC (mains)
electrical supplies only. Do not attempt to use on
any other supply.
Plug your machine into a power point, never in a
light socket.
Do not leave your machine unattended whilst it is
connected to the electrical supply.
Always switch off and remove the plug from the
mains before cleaning, inspecting or adjusting
any part of the trimmer, or if the supply cable has
become damaged or entangled.
Power supply cable
The power supply cable should be regularly
inspected for signs of damage or ageing and
only used if in good condition.
Always keep the power supply cable away from
the cutting line (5), be aware of its position at
all times.
Never carry your machine by the cable or jerk the
cable to separate the connectors. Keep the
cable away from heat, oils and sharp edges.
Have damaged cables replaced completely by
your nearest Black & Decker service centre. Do
not attempt to do this yourself as the switch
handle is not customer serviceable.
When fitting a replacement rewireable plug
neither wire of the supply cable should be
connected to the earth terminal.
Cutting line
Take care against injury from line trimming blade
(7) during unpacking and assembly and any
excess line which may be cut off when the
trimmer is first operated.
The cutting line (5) will continue to run for a short
time after releasing the switch lever. Under no
circumstances should you attempt to stop the
cutting line, always allow it to stop on its own.
Instruction Manual
Congratulations!
Your purchase of this Black & Decker Reflex
®
trimmer
assures you of years of problem free trimming. The
Reflex
®
not only trim ’n’ edges your lawn, it also has
a unique totally automatic line feed system. You do
nothing - the Reflex
®
system means non-stop
trimming; by the use of a simple mechanism it
senses when the line has worn and, when needed,
automatically feeds out line to its optimum cutting
length. You just switch the unit on and trim.
Description
Following is a list of the parts that will be mentioned
in this instruction leaflet and are shown in the
appropriate diagrams:
1. Body
2. Secondary handle
3. Cable restraint
4. Locking ring
5. Cutting line
6. Guard
7. Line trimming blade
8. Spool cover
9. Edge guide
10. Guard retaining lugs
11. Cable storage hooks
12. Spool housing
13. Spool cover tab
14. Lever
15. Eyelet
16. Arrow
17. Spool
18. Hanging hole
19. Power inlet or cable
20. Switch handle
21. Trigger switch
22. Guard screw
23. Guard screw hole
24. Arrow
25. Skid
26. Pedal
27. Button
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GL580C T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GL580C T1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker GL580C T1

Black Decker GL580C T1 Snelstart handleiding - English - 10 pagina's

Black Decker GL580C T1 Gebruiksaanwijzing - Dansk, Svenska, Norsk, Suomi - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info