709471
7
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
7
ENGLISH
(Original instructions)
6. Shoe
7. 24T TCT saw blade (tted) for cutting wood
7a. 44T HSS saw blade for cutting thin wood, PVC and
aluminium
8. Saw blade guard
9. Guard handle
10. Saw dust outlet
Assembly
Warning! Before attempting any of the following operations,
make sure that the tool is switched off and unplugged and that
the saw blade has stopped.
Removing and tting a saw blade (g. A)
Removing
u Keep the spindle lock button (5) depressed and rotate the
blade until the spindle lock engages.
u Loosen and remove the blade retaining screw (11) by
turning it clockwise using the hex key (12) supplied.
u Remove the outer washer (13).
u Remove the saw blade (7).
Fitting
u Place the saw blade onto the inner ange (14), making
sure that the arrow on the blade points in the same direc-
tion as the arrow on the tool.
u Fit the outer washer (13) on the spindle, with the raised
part pointing away from the saw blade.
u Insert the blade retaining screw (11) into the hole.
u Keep the spindle lock button (5) depressed.
u Securely tighten the blade retaining screw by turning it
counterclockwise using the hex key (12) supplied.
Fitting and removing the parallel fence (g. B)
u The parallel fence is used to saw in a straight line parallel
to the edge of the workpiece.
Fitting
u Loosen the locking knob (16).
u Insert the parallel fence (17) through the openings (18).
u Slide the parallel fence into the desired position.
u Tighten the locking knob.
Removing
u Loosen the locking knob.
u Pull the parallel fence off the tool.
Use
Warning! Let the tool work at its own pace. Do not overload.
Note: This tool can be used in the right hand or the left hand.
Adjusting the depth of cut (g. C)
The depth of cut should be set according to the thickness of
the workpiece. It should exceed the thickness by approx. 2
mm.
u Loosen the knob (20) to unlock the saw shoe.
u Move the saw shoe (6) into the desired position.
The corresponding depth of cut can be read from the
scale (19).
u Tighten the knob to lock the saw shoe in place.
Switching on and off
u To switch the tool on, press the lock-off button (2) and
squeeze the on/off switch (1).
u To switch the tool off, release the on/off switch.
Sawing
Always hold the tool with both hands.
u Let the blade run freely for a few seconds before starting
the cut.
u Apply only a gentle pressure to the tool while performing
the cut.
u Work with the shoe pressed against the workpiece.
Hints for optimum use
u As some splintering along the line of cut on the top side of
the workpiece cannot be avoided, cut on the side where
splintering is acceptable.
u Where splintering is to be minimised, e.g. when cutting
laminates, clamp a piece of plywood onto the top of the
workpiece.
Using the sight guide (g. D)
The tool is equipped with a sight guide for straight cutting.
u Align the centre of the guide (22) with the cutting line (21).
u Keep the sight guide aligned with the cutting line while
sawing.
u Work with the shoe pressed against the workpiece.
Dust extraction (g. E)
An adaptor is provided to connect a vacuum cleaner or dust
extractor to the tool.
u Insert the dust extraction adaptor (10a) into the saw dust
outlet (10).
u Connect the vacuum cleaner hose to the adaptor.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
u Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BES510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BES510 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info