581360
5
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
5
ENGLISH
Use
Charging the unit (fig. A)
Note: This unit is shipped in a partially charged state.
X Charge the unit before first use using the mains
charging adaptor (9) for 60 hours or until the green
battery status LED (13) lights.
X Charge after each use until the green battery status
LED (13) lights.
Note: We recommend that this unit is re-charged every
2 months irrespective of use.
To check the battery charge status at any time, turn the unit
on by pressing the on/off button (3). The unit will beep once
and the red power LED (11) and the battery status LED (13)
will light.
The battery status LED (13) displays the level of charge:
X If the battery status LED (13) lights red charge the unit.
X If the battery status LED (13) lights green the unit is fully
charged.
Charging the unit with the mains charger (fig. A)
Make sure that the LED area light is turned off while the unit
is being charged.
X Turn the unit on by pressing the on/off button (3). The
unit will beep once and the red power LED (11) and the
battery status LED (13) will light.
X Connect the mains charging adaptor (9) into the 12 Vdc
charging socket (7) on the top of the unit.
X Insert the mains charging adaptor (9) into a mains
power socket.
X Press the recharge unit button (5). The unit will beep
once and the battery status LED (13) will flash,
indicating that the unit is charging.
Warning! The unit will beep continuously if no charging lead
is connected.
X Charge until the green battery status LED (13) lights
continuously.
X When charging is complete, disconnect the mains
charging adaptor (9) and store in a safe place.
Charging the unit with the 12 Vdc vehicle adaptor
(fig. A & B)
Note: The unit cannot be recharged while the 12 Vdc
accessory outlet (2) is in use or while the unit is being used
to boost/start a vehicle.
X Turn the unit on by pressing the on/off button (3). The
unit will beep once and the red power LED (11) and the
battery status LED (13) will light.
X Remove the 12 Vdc vehicle adaptor (10) from the
storage compartment (1) and plug it into the vehicle’s 12
Vdc accessory outlet.
X Press the recharge unit button (5). The unit will beep
once and the battery status LED (13) will flash,
indicating that the unit is charging.
X Charge until the green battery status LED (13) lights
continuously.
X When charging is complete, disconnect the 12 Vdc
vehicle adaptor (10) and return it to the storage
compartment (1).
Standby mode (fig. A)
When the unit is in standby mode (not connected to a vehicle
and not charging, but with the power on), the battery status
LED (13) will light green to indicate it is ready for use. If the
battery status LED (13) lights red, the unit needs to be
charged.
If the unit is left in standby mode for more than 3 minutes the
unit will automatically shut down. This is to prolong battery
life.
X Press the main on/off button (3) to re-activate the unit.
Using the battery booster (fig. A)
Warning! Make sure the unit is disconnected from all
charging power sources before beginning the battery
boosting procedure.
Warning! This power system is to be used only on vehicles
with dc battery systems.
Warning! Vehicles that have on-board computerized
systems may be damaged if the vehicle battery is boosted.
Before battery boosting this type of vehicle, read the vehicle
owner’s manual to confirm that external-starting assistance
is advised.
Warning! Excessive engine cranking can damage the
vehicle‘s starter motor. If the engine fails to start after the
recommended number of attempts (refer to the vehicle’s
owner manual), discontinue the battery boost procedure and
look for other problems that need to be corrected.
Warning! You MUST turn off the offending items that
discharged your battery, i.e. lights/radio etc. before you start
this procedure.
X Once offending items are turned off, allow your battery
to recover for 2-3 minutes.
X Turn the unit on by pressing the on/off button (3). The
unit will beep once and the red power LED (11) and the
battery status LED (13) will light to indicate that it is
functioning.
X Remove the 12 Vdc vehicle charging adaptor (10) from
the storage compartment (1) and plug it into the
vehicle’s 12 Vdc accessory outlet.
X Press the vehicle boost button (4). The unit will beep
once and the green vehicle boost LED (4) will flash,
indicating that the vehicle battery is being charged/
boosted.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BDV040 T2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BDV040 T2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info