581337
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
5
X Digital cameras and video cameras
X Laptops
Connecting devices to your inverter
AC devices
The power inverter is equipped with a standard mains
socket (1). Plug the cord from the equipment you wish to
operate into the mains socket (1). Make sure that the load
requirement of your equipment does not exceed the rated
wattage indicated on the unit.
Note: Some power supplies may not operate with this
inverter due to the inrush currents required to start those
devices. The inverter will shutdown in overload mode.
USB devices
The power inverter is equipped with a standard USB port (6).
X Plug the USB connector from the equipment you wish to
operate into the USB port (6).
The power inverter is fitted with overload protection and will
shutdown if a load in excess of the rated load is applied.
To restart the appliance after a shutdown due to overloading,
remove the overload and reset by disconnecting from the dc
power source and then reconnect.
Warning! This appliance will not operate high wattage
appliances or equipment that produce heat, such as hair
dryers, microwave ovens and toasters.
Protective features of the power inverter
Your appliance monitors the following potentially hazardous
conditions:
X Low voltage protection. This condition is not harmful
to the appliance but could damage the power source.
The appliance will automatically shut down when the
input voltage drops to 10.5 +/- 0.5 Vdc. When the
conditions are corrected, disconnect from the dc power
source and reconnect.
X Over voltage protection. The power inverter will
automatically shutdown when the input voltage exceeds
1
6.75 Vdc +/- 0.25 V. When the conditions are corrected,
disconnect from the dc power source and reconnect.
X Short circuit protection. A reverse polarity or short
circuit condition may cause external or internal fuses to
open and may cause irreversible damage to the
appliance. Take extra care to insure a correct polarity
connection.
X Overload protection. The power inverter will
automatically shut down when the continuous load
exceeds the rated wattage. When the overload is
removed, reset the appliance by disconnecting from the
dc power source and reconnecting.
X Over temperature protection. If the temperature
inside the appliance is too high, the appliance will
automatically shut down. Allow the appliance to cool for
at least 15 minutes before restarting after a heat-related
shutdown. Unplug the appliance while cooling.
Hints for optimum use
For best results, the appliance should be placed on a flat
and/or solid surface. The appliance should only be used in
locations that meet the following criteria:
X DRY - Do not allow water or other liquids to come into
contact with the appliance.
X COOL - The surrounding air temperature should be
between 4°C and 40°C (39°F and 105°F). Ideally
between 15°C and 25°C (60°F and 80°F). Keep the
appliance away from direct sunlight, when possible.
X WELL VENTILATED - Keep the area surrounding the
appliance clear to ensure free air circulation.
X Do not place items on or over the appliance during
operation. The appliance will shut down if the internal
temperature gets too hot.
X SAFE - Do not use the appliance near flammable
materials or in any locations that may accumulate
flammable fumes or gases. This is an electrical
appliance that can briefly spark when electrical
connections are made or broken.
Warning! Rechargeable devices - Some rechargeable
devices do not operate well from a modified sine wave
inverter. They only operate correctly from a standard
household outlet which provides a pure sine wave.
Therefore, the manufacturer recommends that you operate
these type of devices from a standard household outlet only,
not from the appliance.
This problem does not occur with the majority of battery
operated equipment. Most of these devices use a separate
charger or transformer that is plugged into an ac mains
socket. The appliance is easily capable of running most
chargers and transformers.
Troubleshooting
If the appliance is on but there is no ac output and the green
power LED indicator (5) is not lit:
X Check that all the dc connections are connected
correctly.
X Check the tightness of the dc connections.
If the appliance is on and the appliance does not function but
the red power LED indicator (5) is lit, one of the following
conditions has occurred:
X Low battery voltage
X Over voltage protection
X Short circuit
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BDPC100A T2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BDPC100A T2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker BDPC100A T2

Black Decker BDPC100A T2 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Dansk, Svenska, Norsk, Suomi - 68 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info