53593
4
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
4
ENGLISH
4. Edge guide
5. Manual retraction button
6. Battery cover
7. Belt clip
Assembly
Warning! Make sure that the tool is switched off.
Fitting the batteries (fig. A)
Warning! Use LR44 battery cells only.
Open the battery cover (6).
Insert the batteries into the tool in the orientation as shown.
Close the cover and let it click into place.
Using the edge guide (fig. B)
The edge guide (4) is used to project the laser line square to
the edge of the workpiece.
For left-handed use, slide out the guide located at the left
side.
For right-handed use, slide out the guide located at the
right side.
Rotating the laser head (fig. C & D)
The laser head (2) can be rotated to allow projection of the
laser line in both directions.
While holding the tool with one hand, use the thumb and
index finger of your other hand to rotate the head.
Make sure to control the spring pressure once the head is
halfway.
Gently let the head jump into its position.
Use
To extend the tape, pull the tape hook (3).
To retract the tape, press the retract button (5).
Warning! Keep your fingers away from the tape on retraction.
Do not retract long pieces of tape in one go.
Dab the button (5) to control the speed of retraction.
Using the laser function
The laser line extends the measurement across the workpiece
to aid in marking out prior to sawing applications.
Switching on and off
To switch on, slide the switch (1) into position I.
To switch off, slide the switch (1) into position 0.
Hints for optimum use
The laser line also provides support in surface layout of
materials and/or objects at equal distances (fig. E).
Cleaning and maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Checking and calibrating the laser head (fig. D)
The laser head (2) is factory-adjusted and does not require
adjustment before first use.
However, if the tool has received rough treatment during use,
and the laser line is out of alignment, the laser head can be
calibrated as follows.
Place the tool close to the square corner of a worktop.
Place the tool flush to the edge of the worktop using the
edge guide.
Check that the laser line aligns with the square edge.
If adjustment is required, proceed as follows:
Turn the screw (8) in or out as necessary, until the laser
line aligns with the square edge.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BDM200L bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BDM200L in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info