578006
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
4
The larger battery terminal connects to the smaller
connector terminal.
Insert the battery into the tool in the orientation as shown.
Refit the cover and let it click into place.
Fitting and removing inserts
The marking/hanging insert is used to make a mark on the
level line or to hang the tool on a drywall board using the
drywall pin supplied. The keyhole insert is used to hang the
tool on other types of wall using a screw or nail.
Fitting
Place the insert into the holder from the back of the tool.
Align the notches on the insert with the recesses in the
insert holder.
Let the insert click into place.
Removing
Keep the notches on the insert depressed.
Push the insert out of the holder.
Wall mounting (fig. B)
The unit can be mounted to walls using one of the inserts
(4 or 5).
Hanging insert
The hanging insert (4) can be used for mounting to drywall
surfaces only.
Mount the insert to the tool.
Remove the protective cap (7) from the pin (8) and store it
on the insert as shown (fig. B).
Hold the unit in front of a suitable location and press the
pin straight into the wall.
Warning! The pin of the insert is sharp and should be handled
with care. Replace the protective cap immediately after
removing the insert from the wall.
Keyhole insert
For surfaces other than drywall, the keyhole insert (5) can be
used with a screw in a predrilled hole.
Mount the insert to the tool.
Hang the unit on a screw mounted on a suitable location.
Use
Using the laser level function (fig. C)
Using the laser in auto-leveling mode
Place the tool flat against the wall.
Push the on/off switch (1) up to switch the tool on in
auto-leveling mode.
Move the tool as necessary to position the laser line.
If necessary, hang the unit on the wall using the
appropriate insert.
Note: the laser lines will only be level if the tool is kept within
5° from vertical.
Using the laser in locked/layout mode
When operating in the locked/layout mode, the tool can be
held in any position, e.g. to project slope lines.
Place the tool flat against the wall.
Push the on/off switch (1) down to switch the tool on in
locked/layout mode.
Move the tool as necessary to position the laser line.
If necessary, hang the unit on the wall using the
appropriate insert.
Hints for optimum use
If because of the lighting conditions it is difficult to see
the laser line, or if the laser line has to be transferred
over long distances, you can use the marking target (6) to
enhance laser line (fig. D).
Protecting the environment
Tools
Should you find one day that your tool needs
replacement, or if it is of no further use to you, think
of the protection of the environment. Black & Decker
repair agents will accept old Black & Decker tools
and ensure that they are disposed of in an
environmentally safe way.
Battery
If you want to dispose of the tool yourself, the
battery must be removed as described above and
disposed of in accordance with local regulations.
Place the battery in a suitable packaging to ensure that
the terminals cannot be short-circuited. Take the batteries
to a local recycling station.
Technical data
LZR5 BDL400S
Voltage V 9 9
Battery size 6LR61 6LR61
Laser class 2 2
Operating temperature °C 0 - 40 0 - 40
Weight kg 0.3 0.3
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BDL400S T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BDL400S T1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info