578004
5
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
5
ENGLISH
Never look into the laser beam directly and intentionally.
Do not use optical tools to view the laser beam.
Do not set up the tool at a position where the laser beam
can cross any person at head height.
Do not let children come near the laser.
If the laser line brightness suddenly increases or the
projected line becomes distorted this may indicate a
broken lens. To prevent a laser hazard the tool must not
be used.
Use non-rechargeable batteries only. Do not connect the
laser to any other type of power source.
Features
1. On/off switch
2. Laser head lock switch
3. Laser apertures
4. Laser head
5. Scale
Assembly
Warning! Make sure that the tool is switched off.
Fitting the batteries (fig. A)
Remove the battery cover (6) from the tool.
Insert the batteries into the tool in the orientation as
shown.
Refit the cover and let it click into place.
Installing the tool
The tool can be installed on a surface such as a floor or a wall.
To optimise the length of the laser line, the tool must be
installed onto its bracket. Alternatively, the tool can be
mounted to a wall.
Fitting the tool to the mounting bracket
Install the tool by fitting the slots in the back of the tool
over the hooks of the mounting bracket.
To remove the tool from the bracket, slide the tool off.
Wall mounting (fig. D & E)
The tool can be mounted to walls using the mounting bracket
with a screw (I), a wall pin (II), or an adhesive strip (III).
Keyhole wall mount
The keyhole wall mount (7) is used for mounting to most wall
constructions.
Drive a screw into the wall.
Hang the wall mount onto the fastener by the keyhole (7).
Fit the tool to the bracket.
Wall pin
If the tool is mounted to drywall or other soft materials, the
wall pin must be used:
Remove the protective cap from the pin and store it on the
bracket.
Hold the wall pin at the required height in front of a
suitable location and press the pin straight into the wall.
Hang the mounting bracket onto the fastener by the
keyhole (7).
Fit the tool to the mounting bracket.
Warning! The pin of the bracket is sharp and should be
handled with care. Replace the protective cap immediately
after removing the bracket from the wall
Warning! Do not use a hammer to drive the pin into the wall.
Adhesive strip
If the unit is mounted to surfaces where screws or nails
cannot be used, a removable adhesive adhesive strip (7) must
be used. Adhesive strips can be obtained from your local
retailer.
Warning! Test the strip on an inconspicuous area to make
sure it does not damage the surface material.
Peel the protective foil from one side of the strip (8).
Stick the strip to the bracket.
Peel the protective foil from the other side of the strip.
Press the bracket with the strip to the wall.
Fit the tool to the bracket.
To remove the strip, proceed as follows:
Remove the tool from the bracket.
Hold the bracket with one hand and grasp the end of the
adhesive strip with the other hand.
Slowly stretch the strip parallel to the wall and away from
the bracket, until the entire strip has released.
Dispose of the strip.
Use
Install the tool as required.
Switch the tool on.
Adjust the position of the tool as necessary to position
the laser lines. Be aware that extreme temperature
changes may affect the adjustment of the unit.
After finishing work, always switch off the tool.
Rotating the laser head (fig. B & C)
The laser head (4) can be rotated to allow projection of the
laser lines in both directions.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BDL180 T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BDL180 T1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker BDL180 T1

Black Decker BDL180 T1 Gebruiksaanwijzing - Polski - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info