709546
9
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
ENGLISH
(Original instructions)
9
Sawing (g. E)
u Always hold the tool with both hands (g. E).
u Let the blade (5) run freely for a few seconds before
starting the cut.
u Apply only a gentle pressure to the tool while perform-
ing the cut.
u If possible, work with the shoe (3) pressed against the
workpiece. This will improve tool control and reduce
tool vibration, as well as prevent the blade from being
damaged.
Hints for optimum use
Sawing wood (g. F)
u Clamp the workpiece securely and remove all nails
and metal objects.
u Holding the tool with both hands, work with the shoe
(3) pressed against the workpiece.
Flush cutting (g. G)
The compact design of the reciprocating saw motor hous-
ing and pivoting shoe (3) permit close cutting to oors,
corners and other difcult areas.
To maximize ush cutting capabilities:
u Insert the blade shaft into the blade clamp with the
teeth of the blade facing up.
u Adjust the angle of the handle on the tool so you are
as close to the work surface as possible.
Sawing metal (g. H)
u Use a saw blade suitable for sawing metal. Use a ne-
tooth saw blade for ferrous metals and a coarser saw
blade for non-ferrous metals.
u When cutting thin sheet metal, clamp a piece of scrap
wood to the back surface of the workpiece and cut
through this sandwich.
u Spread a lm of oil along the intended line of cut.
Pocket cutting in wood (g. I)
u Measure and mark the required pocket cut.
u Fit a saw blade suitable for pocket cutting.
u Rest the shoe (3) on the workpiece in such a position
that the blade forms an appropriate angle for the
pocket cut.
u Switch on the tool and slowly feed the blade into the
workpiece. Make sure that the shoe (3) remains in
contact with the workpiece at all times.
Cutting branches
Branches up to 25 mm in diameter can be cut with this
tool.
Warning! Do not use the tool while in a tree, on a ladder
or on any other unstable surface. Be aware of where the
branch will fall.
u Cut downward and away from your body.
u Make the cut close to the main branch or tree body.
Vertical cutting
The tool allows close cutting to corners and other difcult
areas.
u Insert the shank of the saw blade into the blade holder
with the teeth of the blade facing upward.
u Hold the tool with the shoe (3) facing downward so
that you are as close to the work surface as possible.
u Cut forward and away from your body.
Accessories
The performance of your tool depends on the accessory
used.
BLACK+DECKER accessories are engineered to high
quality standards and designed to enhance the perfor-
mance of your tool. By using these accessories you will
get the very best from your tool.
Blades
The saw will accept a blade up to 30 cm long. Always
use the shortest blade suitable for your project but long
enough to keep the blade cutting through the material.
Longer blades are more likely to be bent or damaged
during use. During operation some longer blades may
vibrate or shake if the saw is not kept in contact with the
workpiece.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BDCR18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BDCR18 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker BDCR18

Black Decker BDCR18 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Dansk, Svenska, Norsk, Suomi - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info