53548
3
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
10
Maintenance
Your Elu attachment has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Remove dust and chips using compressed air.
Lubrication
Your attachment requires no additional lubrication.
Cleaning
Regularly clean the attachment with a soft cloth.
Elu After-Sales service
All Elu products are thoroughly tested before leaving the factory. However,
if the product needs repair, please contact your dealer or the Elu Head
Office for the address of the nearest Elu authorized repair agent (please
refer to the back of this manual).
Unwanted products and the environment
Take your attachment to an Elu authorized repair agent where it will be
disposed of in an environmentally safe way.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your Elu
tool, simply return it within 30 days, complete as purchased, to your
Elu dealer, for a full refund or exchange. Proof of purchase must be
provided.
• ONE YEAR FULL WARRANTY •
If your Elu product becomes defective due to faulty materials or
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
The product has not been misused.
Repairs have not been attempted by unauthorized persons.
Proof of purchase date is provided.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
en - 3
ENGLISH
Instructions for use
Always observe the safety instructions and applicable
regulations.
For short workpieces, always use a push stick.
Prior to operation:
Check that the Power Tool is mounted as described above.
Check that all guards and fences are in perfect working order and
mounted correctly.
Connect a dust extractor.
Set the required planing depth (refer to the instruction manual of your
planer).
Switching ON and OFF (fig. A)
Press the ON/OFF-switch of your planer.
Lock the Power Tool in ON-position using the switch strap (1) or
wedge (1a for HH40).
To stop the tool, remove the switch strap or wedge.
When using a no-volt release switch (option)
Press the ON/OFF-switch of your planer.
Lock the Power Tool in ON-position.
Lift the plug cover and plug in the Power Tool behind the connector.
Connect the machining table to the mains by plugging an extension
cable into the connector of the no-volt release switch.
To switch the planer ON, press the green button of the no-volt release
switch.
To switch the planer OFF, press the red button of the no-volt release
switch.
HH40E
On electronic planers, the brake will not operate if switched off via the no-
volt release switch.
Surfacing
Surfacing at 90° (fig. A2)
Press the material firmly against the parallel fence and on the planer
shoe and feed it against the rotating cutter block.
The blade guard will yield and return to its original position
automatically.
Always work with closed hands.
Keep your hands away from the rotating cutter block!
Surfacing at 45° (fig. H)
Reverse the parallel fence (13) as described above.
Proceed as described for surfacing at 90°.
Thicknessing (fig. I)
Set the thicknessing table (7) to the required height allowing for the
chip clearance.
Place the workpiece on the thicknessing table (7) and feed the
workpiece smoothly under the guide blade (32) and parallel to the
planing shoe.
At the outfeed side, pull the workpiece out holding it down.
In case of excessive resistance, reduce the planing depth and check
the blades.
The sliding chip fence (33) can be opened for a better view of the
thicknessing operation.
Slacken the screw (34) and slide the chip fence (33) in the direction of
the arrow (35).
Wear safety goggles during this operation.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker ADE80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker ADE80 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info