825024
4
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
4 global.BISSELL.com
This machine is compatible with BISSELL® formulas made for upright carpet cleaners.
Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine
Note: Fill with warm (60°C MAX) tap water and add the appropriate BISSELL® formula.
Do not use boiling water. Do not heat water or tank in microwave.
1. Choose your formula.
Visit global.BISSELL.com.
2. Lift tank to remove from
machine. Flip open lid.
3. Choose large or small area
fill lines to suit your needs.
4. Add warm tap water
(14F/60°C max) to water
fill line. Do not use boiling
water. Do not heat water in
microwave.
5. Add BISSELL formula to
formula fill line.
6. Close lid until it clicks.
Reinstall clean tank. It will click
into place.
*Compatible formulas include:
3672E: Wash & Protect Pro.
3670E: Wash & Protect Pro Stain & Odour, Wash & Protect Pet Stain & Odour,
Wash & Protect Stain & Odour, Stain Pretreat, Pet Stain Pretreat, Oxy Boost,
Natural Carpet Deep Cleaning Solution, Natural Pet Carpet Deep Cleaning Solution.
WARNING To reduce the risk of fi re and electric shock due to internal component damage, use only BISSELL
cleaning formula intended for use with this machine.
Filling the Clean Water Tank
Pretreat spots and
stains to improve
carpet cleaning
performance.
Keep plenty of
BISSELL cleaning
formulas on hand
so you can clean
whenever it fits
your schedule.
Add Boost carpet
cleaning formula
enhancers to any
formula to increase
its effectiveness.
global.BISSELL.com 5
Three Modes of Cleaning
Startup
This appliance is primarily a carpet cleaner with a steam-cleaning feature.
Remove any solids and use a dry vacuum cleaner over area before using your deep cleaner.
To prevent damage to Berber-style carpets, avoid repeated strokes in the same area. Before
cleaning area rugs, check the manufacturers tag and test an inconspicuous spot on the rug
for colorfastness. Do not use on silk or delicate rugs.
Stay off carpet until dry.
1. Plug into a properly
grounded outlet. Press power
button on handle to turn ON.
2. Water heater will turn on.
Machine defaults to Steamwash
Max mode with brush rolls and
vacuum motor on. Icon on foot
will blink then turn solid when
heater is ready to make steam
(<60 seconds).
3. Press recline pedal to recline
machine.
Steam Pretreat Mode
Loosen tough stains before removing with SteamWash Max Clean mode. Brush rolls and vacuum
motor will shut off in this mode.
1. Press mode button until
Steam Pretreat icon is
illuminated. Icon will blink until
heater is ready to make steam.
2. Press recline pedal to
recline machine. Pull trigger
to release steam and move
machine forward and back
over stain for 20 seconds.
3. After steam pretreat, press
mode button to clean the stain
in SteamWash Max mode.
CONTINUED ON NEXT PAGE
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bissel Revolution HydroSteam 3670E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bissel Revolution HydroSteam 3670E in de taal/talen: Engels als bijlage per email.

De handleiding is 5,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info