711654
4
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
6 7
Troubleshooting for your Heater
Trouble Probable Cause Solution
Heater
Does Not
Turn On.
Timer Activated.
Tip-over switch engaged.
Manual user reset is
activated.
Not plugged in properly.
Electrical outlet does not
hold plug in securely.
Thermostat set too low.
Obstruction causing the
heater not to operate.
Circuit breaker trips.
Press the Power Button to turn on the
Heater.
Set heater upright on a level surface and
follow the Tip-over Shut-off instructions to
resume operations.
Follow reset instructions listed in this
manual.
Ensure plug is properly inserted. Make
sure electrical outlet and circuit breaker
are working.
Have outlet replaced by a licensed
electrician.
Press the Thermostat Button to select the
highest temperature setting.
Unplug the heater and remove all
obstructions. Position your heater 0.9m
(36 inches) away from all objects.
Make sure no other high wattage
appliances are operating on the same
circuit and reset breaker if needed.
Trouble Shooting
General Information:
Environmental Factors - There are a number of factors that will affect your desired comfort level.
These factors can include insulation, open or drafty doors and windows, and outside temperature.
Please check and take action if any of these potential problems are affecting your heaters ability to
adequately warm your room.
Supplemental Heat - Portable electric heaters are intended for supplemental heating of the room you
are in and turn down the central heat thermostat. They are not intended to replace central heating
systems.
DO NOT attempt to repair or adjust any electrical or mechanical functions on this
heater. Doing so will void warranty. The inside of the heater contains no user
serviceable parts. All servicing should be performed by qualified personnel only.
Troubleshooting for your Heater
Trouble Probable Cause Solution
Power Light
is Flashing.
Auto Safety Shut-off system
is activated when there is
potential overheat.
Follow Auto Safety Shut-off instructions to
reset the heater and allow sufficient time
for the heater to cool down before
plugging in again.
Not Enough
Heat.
Heater is in Low or Fan Only
setting.
Thermostat set too low.
Press the Thermostat Button to select
higher temperature setting.
Heater
cycles ON
and OFF
frequently.
The thermostat automatically
turns the heater on and off
to maintain selected comfort
level.
Every 10-15 minute the
heater turns on and runs for
a minute.
To make this occur less frequently press
the Thermostat Button to select the
highest setting.
This is normal operation to ensure the
heater is maintaining the room temp
accurately.
Remote
does not
work
Battery low.
Distance too far.
Control Panel Display dirty.
Change batteries (two AAA batteries,
1.5V).
Remote works up to 6m (20 feet).
Be sure to point remote at control panel
on heater and there are no obstructions.
Make sure display panel is clean.
Heater is
Blowing
Cold Air.
When the heater is in
Thermostat Mode and
reaches the set temperature
it will automatically perform
a 15 second cool down
(blowing cold air) to ensure
thermostat accuracy.
Unit is in the Fan Only
setting.
Power Button may have
been pressed to turn off the
heater.
Raise the temperature higher.
Press the Thermostat Button to select
higher temperature setting.
Press the Power Button to turn on the
heater.
Fan Speed
Doesn't
Change.
All heat settings control the
heat output of the heater
and not the fan speed. Fan
runs at the same speed on
all settings.
Run heater with the highest temperature
setting for maximum heat output.
Unexpected
Noise.
You may hear a popping or
crackling sound as the
heater heats up. This is
normal and safe operation.
Once the heater heats up,
the crackling sound will go
away.
If the noise persists, please contact your
local authorized distributor for Bionaire
TM
appliances.
Unexpected
Smell.
There may be an odor or
vapor coming from the
heater the first time you use
it or after prolonged or
seasonal storage.
This is normal and is the result of dust or
other debris accumulating on the heating
element. Make sure the heater is in a well
ventilated area and continue running until
the odor or vapor goes away.
BCH9300-050_12MLM1.indd 9-10 5/8/12 11:08 AM
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bionaire BCH9300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bionaire BCH9300 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 16,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info