496713
8
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
04
Adjusting pedal resistance
You can adjust the pedal resistance on your Cyberbike™ using the knob loca-
ted at the base of the handlebar tube.
Rotate the knob in an anti-clockwise direction (towards the “-”) to decrease
resistance when pedalling.
Rotate the knob in a clockwise direction (towards the “+” ) to increase resis-
tance when pedalling.
• Pedal resistance can also
be adjusted when pedalling.
4.ADVANCED FUNCTIONS
4.a. Programming:
4.a.I. How to programme the buttons:
• Press the “PROGRAM” button. The LED underneath this button will come on.
Press the button or the direction that you wish to assign to another button
(e.g. the A button). The LED will start to ash steadily.
Press the button that you now wish to use (e.g. the B button). The LED will ash
rapidly for 2 seconds before going off.
Pressing the B button will now carry out the action previously assigned to the
A button.
You can then reprogram any other button or direction as you wish.
4.a.II. Cancelling programming:
• Press the “PROGRAM” button once. The LED will come on.
Press the programmed button (e.g. the B button). The LED will start to ash
steadily.
Press the programmed button again (or the «PROGRAM” button). The LED will
ash rapidly for 2 seconds before going off.
• The B button has now reverted to its original function.
4.a.III. Cancelling all programming:
Press the “START/PAUSE” and “PROGRAM» buttons at the same time and hold
down for 3 seconds. The LED located below the «PROGRAM” button will ash
for 3 seconds.
4.b. Calibrating the handlebar
Press the «PROGRAM” button + the “Y” button for 3 seconds. The LED located
below the “PROGRAM” button will ash.
• Centre the handlebar.
Press the “Y” button. The LED located below the “PROGRAM” button will now
ash more rapidly. The central position of the handlebar has now been set.
• Turn the handlebar to the left or right as far as it will go.
Press the «Y” button. The LED located below the “PROGRAM” button will ash
for 3 seconds before going off. The handlebar calibration process is now
complete.
Restoring the manufacturer’s calibration (default setting):
Press the “START/PAUSE” + “PROGRAM” buttons and hold down for 3 seconds.
The LED will ash for 3 seconds. The handlebar calibration will revert to its
default setting and any previous programming will be deleted.
4.c. Gamecube™ / Cyberbike™ modes
Use the Gamecube™ mode when you want to play with a Gamecube™/ Wii
game. When you want to play with your Cyberbike™ game use the Cyber-
bike™ mode.
CONFIGURATION:
The A / B / X / Y / L / R / Z buttons, the directional pad and analog joysticks
carry out the same actions as those on a traditional Gamecube™ controller.
Brake lever: the brake lever sends back the signal from the «B» button, and can
also be reprogrammed.
4.c.I. Gamecube™ mode
In Gamecube™ mode, FORWARD pedalling is the same as pressing the A but-
ton.
In Gamecube™ mode, REVERSE pedalling is the same as pressing the B button.
ENGLISH DEUTSCH ESPAÑOLFRANCAIS NEDERLANDS ITALIANO PORTUGUÊS
CYBERBIKEGAMECUBE
TMTM
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bigben PS3 Cyberbike bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bigben PS3 Cyberbike in de taal/talen: Engels als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info