753200
3
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
3
WARNING: To avoid damage to the boat and injury to passengers, please don’t exceed the data given on the
builder’s plate.
Registration (For US/Canada customers only)
If you need to register your boat, please have the boat Hull Identification Number and model name ready and then visit
bestwaycorp.com/support to obtain your Certificate of Origin, or you can send e-mail to service@bestwaycorp.us for the
Certificate of Origin.
PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO THE NEW OWNER WHEN YOU SELL
THE CRAFT.
REPAIR INSTRUCTIONS:
• Fully clean the area to be repaired.
• Cut the correct size from the repair patch material.
Apply only the amount of glue needed to cover the repair
site.
• Press the repair patch firmly to repair site for 30 seconds.
• Wait for 1 hour before inflation.
Storage
1. Remove the Oars from the oarlocks.
Note: Keep all accessories for future use.
2. Carefully clean the boat using a mild soap with clean water.
Note: Do not use acetone, acid, and/or alkaline solutions.
3. Use a cloth to gently dry all surfaces.
Note: Do not dry the product in direct sunlight. Also, never dry with equipment such as electric blowers. Doing so will
cause damage and shorten the boat’s life span.
4. To deflate, open the Air Valves pushing the control stem in and rotating until the valves stay open. Deflate all the hull
chambers at the same time so the air-pressure drops together. This will prevent damage form occurring to the boat’s
inner structures.
5. Next deflate the Keel.
6. Disassemble the seat and floor.
7. Fold the boat from front to back to remove additional air. You can also use a pump to drain any remaining air.
The glue is not included in the repair kit due to shipping
constraints. You can find silicone-based glue at most retail
outlets. Carefully read the warning labels and closely follow
instructions on the back of glue before attempting the
following repair steps.
Deflation
Maintenance
1: Inflate according to the PSI marked besides the valve;
2: To avoid the long-time exposure to sunshine or rain, put the outside cover on top for protection when it not being
used;
3: Clean it with mild soap water and soft cloth in case it is not going to be used for a long time. Dry it before putting
them away. Store it at a dry and shady place and keep it out of reach of Children.
OWNER’S MANUAL
WARNING
IMPORTANT SAFETY INSTRUCTIONS
Follow all the Safety and Operating Instructions. If you don’t
follow these instructions, it may cause the boat to overturn or
explode and result in drowning.
1. Do not exceed the maximum recommended number of persons.
Regardless of the number of persons on board, the total weight
of persons and equipment must never exceed the maximum
recommended load. Always use the seats / seating spaces
provided.
2. When loading the craft, never exceed the maximum recommended
load: Always load the craft carefully and distribute loads appropriately
to maintain design trim (approximately level). Avoid placing heavy weights high up.
NOTE: The maximum recommended load includes the weight of all persons onboard, all provisions and
personal effects, any equipment not included in the light craft mass, cargo (if any) and all consumable
liquids (water, fuel, etc.).
3. When using the boat, life saving devices such as life jackets and buoys should be pre-inspected and
used at all times.
4. Before every use, carefully inspect all boat components including air-chambers, grab ropes, oars, and
air valves, to ensure everything is in good condition and tightly secured. If you find any damage, please
stop to repair it.
5. Buckets, water scoops and air pumps should always be available in case of air leakage or if the boat
takes on water.
6. When the boat is in motion, all passengers must remain seated at all times to avoid going overboard.
Keep the boat balanced. Uneven distribution of persons or load in the boat may cause the boat to
overturn and result in drowning.
7. Use the boat near the shore and beware of natural factors such as wind, tide waters and tidal waves.
BE AWARE OF OFFSHORE WINDS AND CURRENTS.
8. If one chamber is punctured when the boat is in the water, it may be necessary to fully inflate the other
air chamber to prevent the boat from sinking.
9. Be careful when landing on the shore. Sharp and rough objects such as rocks, cement, shells, glass,
etc. may puncture the boat. To avoid damage, do not drag the boat on rough surfaces.
10. When choosing an outboard motor, refer to the technical specifications section of this manual to
determine acceptable horsepower ratings.
11. For electrical motors equipped with batteries, note that battery acid can be caustic, which can cause
damage to both skin and boat materials.
12. For motors which use fuels such as gas, oil or petrol, since fuel is a flammable substance, it should be
kept away from open flames. Further, clean the boat material immediately if fuel spatters onto the boat
surface. Be aware of the potential harmful efects of liquids such as battery acid, oil or petrol. The liquids
may damage your boat.
13. Inflate according the numbered air chamber and rated pressure of the boat, or it will cause over-inflation
and potential and boat explosion. Exceeding the data given on the capacity plate may cause the craft to
be damaged, overturn and lead to drowning.
14. If you use the tow rings to tow the boat, go slowly to avoid over-towing as damage may occur.
15. Know how to operate a boat. Check in your local area for information and/or training as needed. Inform
yourself about local regulations and dangers related to boating and/or other water activities.
SAVE THESE INSTRUCTIONS
Part No. Description QTY SPARE PART NO.
001 Boat
1
002
Floor board
1
003
Bench seat
1
004 Oar 1
pair
005 Air pump
1
006 Pressure gauge 1
007 Drain valve 1
008 Repair kit 1
Note:
- The floorboards must be assembled before inflating the hull.
NOTE: Pressure gauge is for inflation purpose only, and the value of the pressure gauge is just for reference, should
not be used as a precision instrument.
- Only use Bestway® approved inflation pumps.
- Never use motor-driven high-pressure air pumps as this may result in over-inflation.
- Under and over-inflation will result in safety hazards.
- Always check the inflation pressure before using the boat.
- Never stand on or rest objects on the boat during inflation.
- Never open the cap of air valve while the boat is in use.
- Be sure the valve is tightly closed before using the boat.
Note: When the oars are not in use, lock the oars into the Oar Clasps to avoid damage.
Outboard Motor Installation
With the boat fully inflated and in the water, attach your outboard motor onto Engine Mount at the center of the Transom.
Note:
- Ensure the motor is always fixed on the Transom.
- Read the instruction of outboard motor for correct installation and operation.
- Overpowering a boat can result in serious injury, death or boat damage. The maximum motor power to be used see
marking on the product.
#65062
010 005
004
006
008
001
002
003
007
009
Part No.
001
002
003
004
005
006
007
008
009
010
QTY
1
1
1 pair
1
1
1
1
1
1
1
Description
Boat
Bench seat
Oar
Pressure gauge
Air pump
Drain valve
Airdeck floor
Base board
Repair kit
Bag
SPARE PART NO.
Part No.
001
002
003
004
005
006
007
008
009
010
QTY
1
2
1 pair
1
1
1
1
1
1
1
Description
Boat
Bench seat
Oar
Pressure gauge
Air pump
Drain valve
Airdeck floor
Base board
Repair kit
Bag
SPARE PART NO.
#65046
001
004
005
002
003
006
007
008
#65047
004
001
008
002
006
003
005
009
#65049
002
004
005
003
006
001
009
008
007
007
010
010
Technical Specifications
65049
Item Size Recommended
working pressure Maximum load capacity Maximum motor
power
2.25 kW (3 hp)
11.2 kW (15 hp)
10'10" x 64" x 17"
3.30m x 1.62m x 44cm
9'2" x 60" x 16.5"
2.80m x 1.52m x 42cm
7'6" x 51" x 13"
2.30m x 1.30m x 33cm
258 kg (568.8 lbs.)
2 adults
640 kg (1411 lbs.)
4 adults + 1 child
3.5 psi
0.24 bar
3.5 psi
0.24 bar
65062 18.4 kW (25 hp)
12'6" x 71" x 18"
3.80m x 1.80m x 46cm
780 kg (1719.6 lbs.)
6 adults
3.5 psi
0.24 bar
65046
65047 7.5 kW (10 hp)
480 kg (1058.2 lbs.)
3 adults + 1 child
3.5 psi
0.24 bar
Floor board
pressure
5 psi
0.35 bar
5 psi
0.35 bar
5 psi
0.35 bar
5 psi
0.35 bar
303021213995_21x28.5cm(65046/65047/65049/65062)_20季说明书
Part No.
001
002
003
004
005
006
007
008
009
010
QTY
1
2
1 pair
1
1
1
1
1
1
1
Description
Boat
Bench seat
Oar
Pressure gauge
Air pump
Drain valve
Airdeck floor
Base board
Repair kit
Bag
SPARE PART NO.
P04763
P6889ASS16
P5H666ASS19
P5C403ASS16
P3045BASS16
F3C092ASS14
P03775
P03865
P6J718ASS18
P04283
TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
bestwaycorp.com/support
P04760
F3H101ASS17
P03777
P5L334ASS19
P3045BASS16
P5C403ASS16
F3C092ASS14
P6J718ASS18
P04761
P6876ASS17
P5H666ASS19
P5C403ASS16
P3045BASS16
F3C092ASS14
P03779
P03863
P6J718ASS18
P04284
P04762
P6876ASS17
P5H666ASS19
P5C403ASS16
P3045BASS16
F3C092ASS14
P03781
P03864
P6J718ASS18
P04283
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bestway 65062 Hydro-Force bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bestway 65062 Hydro-Force in de taal/talen: Alle talen als bijlage per email.

De handleiding is 24,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info