660734
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
SLACKENING THE HARNESS
FITTING THE CAR SEAT WITH THE 3-POINT LAP&DIAGONAL SEAT BELT
1. The harness is slackened by pressing the lever (under the seat cover) on front
of the seat.
2. Press down on the label marked “Press” as you grip the two shoulder straps
with your other hand.
3. Pull the shoulder straps towards you to loose the harness.
4. Do not trap the harness adjuster straps as you press the lever down.
9-18kg
Step1. Place the child safety seat on the vehicls s seat ensuring it is firmly pressed
against the car seat backrest.
Step2.Thread the car seat belt in through the seat belt route slot in the seat s plastic
backrest furthest from the car s seat belt buckle, and then out through the
other seat belt route slot and fasten it into the seat belt buckle.
Step3. Check the webbing of the seat belt has not become twisted or tangled and
that the lap belt goes under the armrest and the diagonal belt under headrest
belt guide then goes over the red belt guide on the side of the backrest.
Step4.Place your knee on the base of the safety seat and grip the top piece of
seatbelt webbing. Pull the webbing upwards to tighten the seat belt.
(approx. 9 months to 4 years)
FITTING THE CAR SEAT USING THE BELT GUIDE
Step5.Finish tightening the webbing by pulling the diagonal strap upwards until
there is no slack and the seat is held firmly in place. Now you can strap your
child into the seat.
Make sure the seat belt has not become twisted. Also check that the cover is
not impeding the movement or fit of the seat belt webbing in any way.
To release your child seat follow the above instructions in reverse order.
ADJUST THE HEADREST HEIGHT
15-36kg
(approx. 3 years to 11 years)
According to children s different height, the headrest can be
adjusted up and down.
Step1. Put your left (or right) hand on the backrest.
Step2. Pull the button with your another hand.
Step3. Make the headrest up and down as your need.
To make sure that the position fits for your child.
IMPORTANT:Bofore fitting the seat remove the shoulder straps,crotch strap
and lap strap.
Step1. Place the child safety seat on the vehicls s seat ensuring it is firmly pressed
against the car seat backrest.
Step2. Place the child in the child safety seat.
Step3. Fasten the seat belt, making sure that both sections of the seat belt webbing go
under the armrest neat the buckle, the diagonal belt go through the red belt
guide on the side of the headrest. Check that the webbing has not become
twisted and tighten the seat belt by pulling the diagonal strap upwards.
Make sure the seat belt has not become twisted.Also check that the cover is
not impeding the movement or fit of the seat belt webbing in any way.
To release your child. Simply unfasten the seat belt in the normal way.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bertoni Uno bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bertoni Uno in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info