673662
16
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
7. MAINTENANCE AND REPAIRS
7.1 GENERAL INFORMATION
The operator is allowed to carry out the
following maintenance:
- Blade sharpening
, periodically; the interval and
length
of the sharpening obviously depend on the use
of the machine (work times and type of product used).
-
Lubrication of the carriage guide bars
and overplate:weekly;
-
Adjustment of the blade drive chain
necessary, see the relative paragraph.
- Adjustment of the bevel gear pair
: as necessary,
see the relative paragraph.
Maintenance to be carried out exclusively by personnel
authorised by the manufacturer is as follows:
- Replacing the blade;
- Replacing the sharpener
grindstones; - Replacing the chain;
-
Repairing the structural parts, repairing
and/or replacing compon
ents under the base.
7.2 SHARPENING THE BLADE
Proceed as follows as soon as it is noticed that there is
less cutting capacity:
WARNING: Danger of cutting!
Use protective gloves which are resistant to cutting
and tearing and concentrate on the job at hand.
PAY CAREFUL ATTENTION!
-
Loose the knob of handle grip of the sharpener.
-
Lift the sharpener and to rotate him/it of 180°.
-
Low with attention the sharpener, the blade
will center automatically among the two grindstones.
- Block the knob.
-
Rotate the volano and to press contemporarily,
for about 10-15 seconds, the buttons.
-
Interrupt the rotation and to check on the blade if a light
drivel is formed.
-
Than put in rotation the badminton and press
contemporarily the button for 2-3 seconds.
- Put the sharpener in the native position. .
Note: do not insist more than 2-
3 seconds with the
burring operation so as to avoid damage to the edge
of the blade.
P15 Series
, periodically; the interval and
of the sharpening obviously depend on the use
of the machine (work times and type of product used).
Lubrication of the carriage guide bars
Adjustment of the blade drive chain
: as
: as necessary,
Maintenance to be carried out exclusively by personnel
Repairing the structural parts, repairing
ents under the base.
1
Proceed as follows as soon as it is noticed that there is
Use protective gloves which are resistant to cutting
and tearing and concentrate on the job at hand.
Loose the knob of handle grip of the sharpener.
3
Lift the sharpener and to rotate him/it of 180°.
Low with attention the sharpener, the blade
will center automatically among the two grindstones.
Rotate the volano and to press contemporarily,
Interrupt the rotation and to check on the blade if a light
4
Than put in rotation the badminton and press
3 seconds with the
burring operation so as to avoid damage to the edge
16
12-12
-
User Manual
2
5
-
07 UM – CodeF2 - Rev. 0.1
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Berkel P15 Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Berkel P15 Series in de taal/talen: Engels als bijlage per email.

De handleiding is 4,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info