710521
10
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
10
Drip Coffee maker Use instructions
BEFORE FIRST USE
Check that all accessories are complete and the unit is not damaged. Add water into water tank (4)
to the max level and brew water for several times without coffee powder, then discard the water.
Clean all detachable parts thoroughly with warm water.
USING YOUR COFFEE MAKER
1. Open the top lid and ll the water tank (4) with drinking water. The water level should not exceed
the maximum level marked in water gauge (5).
2. Place the funnel into the funnel support and make sure the funnel is assembled correctly. Then
put the lter correctly.
3. Add coffee powder into lter (1). Usually a cup of coffee need a level spoon of coffee powder, but
you may adjust according to personal taste. Then close the top lid.
4.Place the carafe on the keeping warm plate (7).
5. Plug the power cord into the outlet. The LCD will display will ash.
6. Press on/auto/off button once, the indicator in it will be illuminated red. The appliance will begin
working.
7. The brewing process can be interrupted by pressing the on/auto/off button twice at any time du-
ring operation, and the indicator in it will be illuminated blue, after about 15s, it will be extinguished.
The appliance will continue brewing once on/auto/off is pressed again.
8. Remove out carafe to serve when nish brewing (about one minute later after the coffee stops
dripping out.)
9. When the process is nished, if you do not want to serve immediately, keep the coffee maker is
energized, the coffee can be kept warm in the keeping warm plate (7). The appliance will be cut off
power automatically after 40 minute if it has not been manually disconnected at the completion of
brewing.
10. Always turn the coffee maker off and disconnect the power supply when not use.
AUTOMATIC START FUNCTION
If you do not want the coffee maker to start operation immediately, rst follow steps 1 to 5 of above
section, then you can set the automatic start function as follows:
1. Press PROG button one time, the word CLOCK is showed at the up-right corner on display.
2. Press the HOUR and MIN button continuously to set the present time (real clock)
3. Press PROG button again and the word TIMER shows on up-left corner of display.
4. Set the delayed starting time by pressing HOUR oand MIN button repetitively.
5. After setting the presetting time, press the PROG button once, the letter TIMER on the LCD will
disappear. The LCD will display the current clock. After 15s, the blue indicator in PROG button will
be extinguished.
6. Press the on/auto/off button twice, the indicator in it will illuminate blue and ash. The LCD will
display the current clock. You may see the automatic start time by pressing PROG twice.
Note: You may cancel the automatic start function by pressing on/auto/off button once to stop ma-
chine, if you want to brew coffee again immediately, you shall press on/auto/off button once again to
start brewing immediately. If you want to change the automatic start time, only following the above
1-4 steps again.
When the time is due the blue indicator in on/auto/off will stop ashing and illuminate red, then the
unit starts brewing. The appliance will be cut off power automatically after 40 minute if it has not
been manually disconnected at the completion of brewing.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Beper 90520 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Beper 90520 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info